Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Fort Lauderdale?
Aluminum fence installation in Fort Lauderdale typically costs between $4,000 and $10,000 for a standard residential project, with most homeowners landing somewhere in the $5,500 to $7,500 range depending on linear footage, fence height, and grade of aluminum selected. That price includes materials, labor, concrete for posts, and permit fees – all written down before a single post hole is dug. At Rowan Construction Group, Grant Rowan has priced and delivered fence installations across Fort Lauderdale since 2007, and every quote is a flat written number with a written scope attached, not a ballpark figure scribbled on a business card.
Aluminum Fence Installation Cost Breakdown (2026)
Aluminum fence cost in Fort Lauderdale breaks down across four main line items: materials, labor, concrete and hardware, and permitting. Here’s how those numbers look for a typical single-family home in this market.
| Line Item | Typical Range (Fort Lauderdale, 2026) | Notes |
|---|---|---|
| Aluminum fence panels (materials) | $18 – $45 per linear foot | Residential grade vs. commercial grade; picket spacing and height both affect cost |
| Post installation and concrete | $6 – $12 per linear foot | Fort Lauderdale’s sandy, brackish soil often requires deeper footings than inland markets |
| Labor | $10 – $20 per linear foot | Gates, grade changes along the fence line, and pool enclosure requirements add time |
| Gates (per gate) | $300 – $900 | Single pedestrian gate vs. double drive gate; self-closing pool gates cost more |
| Permit (City of Fort Lauderdale) | $150 – $400 | Required for most residential fence installations; pool barrier fences are inspected separately |
| Old fence removal and disposal | $300 – $800 | Chain link and wood removal are the most common in Flagler Village and Riverside neighborhoods |
| Typical total project cost | $4,000 – $10,000 | 150-200 linear feet with one or two gates; most Fort Lauderdale residential lots |
A few things push projects toward the higher end of that range in Fort Lauderdale specifically. First, Florida Building Code requires pool barrier fences to be a minimum of 48 inches tall with self-latching, self-closing gates – and those gates are inspected by the city, not just installed and signed off internally. Second, the coastal air here accelerates corrosion on fasteners and posts; going with a powder-coated aluminum with a marine-grade finish adds roughly $3 to $6 per linear foot to material cost but is worth it in neighborhoods like Harbor Beach or Rio Vista where salt air is a constant. Third, many older lots in Colee Hammock and Victoria Park have mature root systems that complicate post installation and add labor hours. None of that is hidden when you get a quote from Rowan – it’s listed as a separate line so you know exactly what you’re paying for and why.
At the lower end – around $4,000 to $5,500 – you’re typically looking at a shorter run of fence (100 to 130 linear feet), a standard 48-inch residential grade panel, one pedestrian gate, and straightforward soil conditions. Larger lots in Coral Ridge or Lauderdale Manors that need 200-plus linear feet with multiple gates and a pool barrier section can reach $8,500 to $10,000 without any unusual complications.
What Affects Aluminum Fence Installation Pricing in Fort Lauderdale
- Linear footage and lot shape: This is the single biggest cost driver. Fort Lauderdale lots vary considerably – a standard interior lot in Progresso Village might need 140 linear feet, while a corner lot in Coral Ridge Country Club can need 260 feet or more. Every additional foot adds material and labor cost at a roughly proportional rate.
- Fence height: Residential aluminum fence comes in 36-inch, 48-inch, 54-inch, and 60-inch heights. The City of Fort Lauderdale limits front-yard fence height to 4 feet in most residential zones, while rear and side yards typically allow up to 6 feet. Taller panels use more aluminum and require heavier posts with deeper footings.
- Aluminum grade and finish: There’s a real difference between a builder-grade residential panel at $18 to $22 per linear foot and a commercial-grade or ornamental panel at $35 to $45. In coastal Fort Lauderdale neighborhoods, the powder-coat finish matters as much as the aluminum gauge. A thin finish that passes muster in Orlando won’t hold up the same way two blocks from the Intracoastal.
- Soil conditions and post depth: Fort Lauderdale’s soil profile – sandy fill in many areas, limestone caprock in others, and occasionally organic material near the New River and its tributaries – affects how deep posts need to go and whether auger rental is sufficient or a hydraulic post driver is needed. In some areas of Tarpon River and Edgewood, crews have hit caprock at 18 inches, which adds time and cost.
- Pool barrier compliance: Any fence that serves as a pool barrier in Fort Lauderdale must meet Florida Building Code Section 454, which specifies gate hardware, picket spacing (no more than 4 inches between pickets), and height requirements. The inspection adds a scheduling step and sometimes a second visit if there are corrections. Budget an additional $400 to $700 for a pool-specific gate setup if this applies to your property.
- Number and type of gates: A single pedestrian gate adds $300 to $500 to the project. A double drive gate that accommodates a vehicle runs $600 to $900, and if you want an automated opener, that’s a separate trade. Most homeowners in neighborhoods like Sailboat Bend add at least one gate; properties on corner lots or with detached garages often need two or three.
- Old fence removal: If you’re replacing an existing wood privacy fence or aging chain link, factor in $300 to $800 for removal and disposal depending on the footage and material. Wood fences with rotted posts set in concrete take longer to extract, which pushes labor costs higher.
Before
AfterAluminum vs. Other Fence Types in Fort Lauderdale: Cost Comparison
Aluminum isn’t the only option, and it’s worth knowing what you’re trading off when you choose it. In Fort Lauderdale’s climate, aluminum and vinyl consistently outperform wood and wrought iron on a total-cost-of-ownership basis, even if the initial price tag is higher than wood.
- Vinyl fence installation: $3,500 – $9,000 for a typical Fort Lauderdale residential project. Lower material cost than aluminum for basic privacy panels, but no good option for pool barrier picket spacing compliance in most styles.
- Aluminum fence installation: $4,000 – $10,000. Higher upfront than vinyl for equivalent footage, but aluminum holds up better under direct UV exposure and doesn’t expand and contract as aggressively in South Florida’s heat cycles, which means fewer loose post issues over time.
- Wood fence: Generally $3,000 – $7,500 installed. Lower upfront, but in Fort Lauderdale’s humidity and salt air, a wood fence near the coast can show significant rot and mold within 5 to 7 years without regular treatment. Maintenance costs close the gap quickly.
- Wrought iron: $6,000 – $14,000 installed. Premium look, but genuine wrought iron rusts in coastal climates. Most of what’s installed today is steel with a rust-resistant coating, and even that needs maintenance in a maritime environment. Aluminum gives you a similar aesthetic at lower initial cost and dramatically lower long-term maintenance.
For homeowners in Fort Lauderdale who want the open, sightline-preserving look that works well with the city’s tropical landscaping and pool-focused backyards, aluminum is consistently the practical choice. The powder-coat finish is factory-applied and doesn’t need periodic painting the way wrought iron does.
Fort Lauderdale Permit Requirements for Aluminum Fences
The City of Fort Lauderdale requires a building permit for most fence installations, and the fee typically runs $150 to $400 depending on the scope. You’ll submit a site plan showing property lines and fence placement, and the fence must comply with the City’s Land Development Regulations – most residential zones allow fences up to 4 feet in the front yard and 6 feet on the side and rear. If your fence is in a historic district like Sailboat Bend or parts of Rio Vista, there are additional design guidelines that affect material and finish choices.
For pool barrier fences, the City of Fort Lauderdale enforces Florida Building Code Section 454, which means your fence installation will be inspected by a city building inspector, not just signed off by the contractor. At Rowan Construction Group, we handle permitting on your behalf – the permit cost is a line item in your written quote, not an afterthought that shows up as a surprise on the final invoice. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and permitting is part of that price.
One thing homeowners in unincorporated Broward County areas adjacent to Fort Lauderdale sometimes miss: if your property falls under county jurisdiction rather than city jurisdiction, the permit requirements and fee structure are slightly different. We verify jurisdiction as part of the quoting process.
How to Save on Aluminum Fence Installation
The most effective way to save money on a fence installation in Fort Lauderdale isn’t to buy the cheapest material – it’s to make decisions before the crew shows up that prevent costly changes mid-project.
- Get a land survey or pull your existing survey before quoting: Fence installations placed on the wrong side of a property line have to be moved, which means you pay for labor twice. In dense neighborhoods like Flagler Village or Victoria Park, property lines are tight and disputes with neighbors over fence placement are more common than people expect. A survey that costs $300 to $600 upfront is cheaper than a relocation later.
- Decide on gate placement before the quote, not after: Gates are the most customized part of a fence installation and the hardest to move once posts are set. Knowing where your gates go – and how wide they need to be for a mower, vehicle, or equipment – before the quote is finalized means the written price is accurate and there are no signed change orders adding to the total.
- Bundle fence installation with other exterior work: If you’re already planning a paver patio or driveway project, scheduling both in the same mobilization cuts overhead. Rowan handles both trades, and combining scopes can reduce total project cost by eliminating duplicate site visits.
- Choose a standard panel height for front yard sections: A 48-inch panel is the code-compliant maximum for most Fort Lauderdale front yards and is the most commonly stocked height. Ordering a non-standard height for a front section that’s visible from the street adds material cost without adding visual benefit.
- Use the Free Second Opinion offer: If you’ve already gotten a written estimate from another contractor, bring it to Rowan and Grant Rowan will review it line by line at no charge. That kind of comparison often surfaces differences in material grade, post spacing spec, or permit handling that aren’t obvious when you’re looking at two bottom-line numbers side by side.
To get a written price for your specific property – footage, gate count, and permit included – call (754) 254-7676. Estimates are free and the quote you receive will be a flat number with a written scope, not a range to be revised later.
What the Installation Process Looks Like at Rowan
Knowing what happens between the quote and the finished fence helps you plan and also lets you hold any contractor accountable to a clear sequence. At Rowan Construction Group, the process runs like this:
- Written quote with scope: Grant Rowan or a senior estimator visits the property, measures the fence line, notes soil conditions and any obstacles, and delivers a flat written price that includes materials, labor, permit fees, and removal of any existing fence. You know the number before anything is scheduled.
- Permit application: We submit the permit application to the City of Fort Lauderdale (or Broward County, depending on jurisdiction) and handle the back-and-forth with the building department. Most residential fence permits in Fort Lauderdale are approved within 5 to 10 business days.
- Material ordering and delivery: Aluminum fence panels, posts, and gate hardware are sourced from vetted suppliers and staged for delivery. Lead times vary, but most standard residential aluminum fence orders are available within a week of permit approval.
- Installation day: The crew arrives uniformed and on schedule. Post holes are dug or augered to the specified depth, concrete is set, and posts are checked for plumb before panels are attached. The crew photographs the installation at each stage – those photos are part of the documented record you receive when the job is done.
- Inspection: For pool barrier fences, a city inspector confirms compliance before we close the permit. You receive a copy of the passed inspection as part of your project documentation.
- Final walkthrough: Grant Rowan or the project lead walks the fence line with you, confirms every gate operates correctly, and hands over the documented photo record and copy of the closed permit. The 365-Day Done Right Promise applies from that date – if something isn’t right within the year, we make it right.
No work proceeds on a change order until it’s signed. If something unexpected comes up during installation – a subsurface obstacle, a property line discrepancy, a homeowners’ association requirement that wasn’t disclosed – you’ll see it in writing before the crew adapts the plan.
Neighborhoods We Serve in Fort Lauderdale
Rowan Construction Group works across Fort Lauderdale and the surrounding Broward County communities. On the Aluminum Fence Installation in Fort Lauderdale service page you’ll find full details on our service area, but the neighborhoods we work in most frequently for fence projects include Victoria Park, Coral Ridge, Rio Vista, Sailboat Bend, Flagler Village, Colee Hammock, Harbor Beach, Tarpon River, Lauderdale Manors, Edgewood, and Riverside Park. Each of these neighborhoods has its own quirks – soil conditions, HOA design guidelines, lot shapes, and proximity to the Intracoastal or New River – and we factor those into the quote rather than applying a generic price per foot regardless of conditions.
If you’re outside the city limits in unincorporated Broward County, the same process applies. We verify permit jurisdiction, confirm applicable code requirements, and give you a written price before any work starts – the same discipline that has kept Rowan’s projects within a few percent of the agreed cost across more than 4,000 jobs since 2007.
FAQs – Aluminum Fence Installation Cost in Fort Lauderdale
How much does aluminum fence installation cost in Fort Lauderdale?
Aluminum fence installation in Fort Lauderdale costs $4,000 to $10,000 for a typical residential project, with most homeowners spending $5,500 to $7,500. That range covers 150 to 200 linear feet of standard residential-grade aluminum fence, one or two gates, post installation with concrete, and permit fees. Larger lots, taller panels, marine-grade finishes for coastal properties, or pool barrier compliance requirements push costs toward the higher end. Call (754) 254-7676 for a written price specific to your property – the estimate is free.
Is aluminum fence more expensive than vinyl in Fort Lauderdale?
Aluminum fence installation typically costs $500 to $1,500 more than vinyl for equivalent footage in Fort Lauderdale, starting at $4,000 vs. $3,500 for vinyl at the low end. The trade-off is performance in South Florida’s climate: aluminum handles UV exposure and heat cycling better than vinyl, which can warp or discolor over time. For pool barrier applications, aluminum picket designs are also better suited to the required spacing specifications under Florida Building Code. On a 10-year total-cost basis, the gap between aluminum and vinyl narrows because aluminum requires less maintenance.
Do I need a permit for a fence in Fort Lauderdale?
Yes, the City of Fort Lauderdale requires a building permit for most residential fence installations, and the permit fee typically runs $150 to $400. Pool barrier fences require a separate inspection by a city building inspector to confirm compliance with Florida Building Code Section 454. Rowan handles the permit application as part of the project – it’s a line item in the written quote, not an add-on cost that appears later. Most residential fence permits in Fort Lauderdale are approved within 5 to 10 business days of a complete application.
How long does aluminum fence installation take in Fort Lauderdale?
Most residential aluminum fence installations in Fort Lauderdale take one to two days of on-site work once permits are approved and materials are on hand. The total timeline from signed quote to finished fence is typically two to four weeks, with the majority of that time in the permitting and material lead-time phase rather than the installation itself. Pool barrier fence projects add an inspection visit, which can add two to five business days to the schedule depending on the city inspector’s availability. We give you a timeline in writing when the project is scheduled, not a vague estimate.
What is the best aluminum fence for a coastal Fort Lauderdale property?
For properties within a half-mile of the Intracoastal or the ocean – neighborhoods like Harbor Beach, Rio Vista, or Coral Ridge – the right specification is a powder-coated aluminum panel with a marine-grade finish applied at the factory, paired with stainless steel or hot-dipped galvanized hardware at every connection point. Standard powder coat is fine for inland Fort Lauderdale properties, but salt air accelerates corrosion on fasteners and post caps within a few years if the hardware grade is wrong. Upgrading to marine-grade hardware adds $3 to $6 per linear foot to the material cost and is worth it on any property where salt air is a factor. When we quote a coastal property, that specification is in the written scope so you can compare it against any other quote on equal terms.
Can Rowan give me a second opinion on a fence estimate I already have?
Yes. Rowan Construction Group offers a free second opinion on any written estimate. Bring in a competitor’s quote and Grant Rowan will review it line by line at no charge – comparing material grade, post spacing specification, permit handling, and anything else that affects what you’re actually getting for the price. There’s no obligation and no pressure. If the competitor’s number is fair for the spec described, we’ll say so. Call (754) 254-7676 to schedule that review.
Key Takeaways
- Aluminum fence installation in Fort Lauderdale costs $4,000 to $10,000, with most projects landing between $5,500 and $7,500.
- Material grade, fence height, number of gates, soil conditions, and pool barrier compliance are the five biggest cost variables in this market.
- The City of Fort Lauderdale requires a building permit for most residential fences ($150 to $400), and pool barrier fences require a city inspection.
- Coastal properties in Harbor Beach, Rio Vista, and Coral Ridge need marine-grade hardware and finish – standard powder coat isn’t sufficient near salt air.
- Every Rowan project starts with a written flat price and written scope. No work proceeds on a change until a signed change order exists.
- The 365-Day Done Right Promise applies to every fence installation – if it’s not right within the year, Rowan makes it right.
- Rowan offers a free second opinion on any written estimate from another contractor – no obligation.
For homeowners doing early research, the Rowan Construction Group home page covers the full range of trades and the Haven Standard that governs how every project is priced, documented, and guaranteed.
Get a Written Quote for Your Fort Lauderdale Fence
If you’re ready to move from a price range to an actual number for your property, call Rowan Construction Group Fort Lauderdale at (754) 254-7676. Grant Rowan or a senior estimator will visit, measure the fence line, and deliver a flat written price with a full scope – materials, labor, permit fees, and removal of any existing fence included. The estimate is free, and the quote you receive is the number you pay. No adjustments after the fact, no “call for a quote” loop.
A live person answers at (754) 254-7676 around the clock. If your project is still in the comparison stage, bring any written estimate you’ve already received – Rowan will review it line by line at no charge.
Pricing reflects the Fort Lauderdale market as of 2026. Rowan Construction Group Fort Lauderdale offers free estimates – call (754) 254-7676.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale since 2007.
What Our Customers Say
"Solid work, decent crew, and the site was left tidy every evening."
- Pearl A."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R.