Driveway & Pavers in Fort Lauderdale - Free Measure, Itemized Written Quote

Trusted Driveway & Pavers for Fort Lauderdale Homeowners

A new Driveway & Pavers - Fort Lauderdale installation typically costs $7,000-$18,000 installed, while concrete runs $4,500-$12,000 and asphalt $3,500-$9,000. Most projects are quoted within 48 hours and scheduled within two weeks, with the actual install taking 3-5 days depending on substrate condition and permit timing. Call (754) 254-7676 to schedule your free written estimate - every quote includes a flat price, written scope, and documented photo record before any work begins.

Call (754) 254-7676

We’ve been installing and repairing driveways, patios, and hardscapes across Fort Lauderdale since 2007. That’s 4,000-plus projects with a written price delivered before anyone picked up a tool, and final invoices within a few percent of that number every time. The discipline is Clause 1 of The Haven Standard: no work starts until the customer holds a flat price in writing. Grant Rowan built this practice into Rowan Construction Group after seeing too many Fort Lauderdale homeowners surprised by mid-project cost jumps on jobs that started with a verbal “ballpark.”

Our crews are background-checked, uniformed, and arrive with a documented photo record as standard - not an upgrade you pay extra for. The 365-Day Done Right Promise backs every driveway and paver project: if it’s not done right, we make it right, with the guarantee printed on every page and linked to a terms page you can read before you sign. We source across fifty-plus vetted brands including Belgard and Techo-Bloc pavers, which means the written quote contains honest numbers rather than inflated ones.

What Our Driveway & Pavers Service Includes

Paver Driveways

Paver driveways use interlocking concrete, clay brick, or natural stone units set on a compacted aggregate base with polymeric sand joints. In Fort Lauderdale, we regularly see premature settling in Victoria Park and Coral Ridge homes where the original installer skipped the 6-inch base layer or used improper edge restraints, causing the pavers to shift under the weight of daily parking. We excavate to proper depth, install and compact a crushed concrete base in lifts, set pavers to manufacturer specs, and seal with joint stabilizing sealer that holds up to our summer downpours and salt air.

Concrete Driveways & Concrete Work

Concrete driveways are poured-in-place slabs, typically 4-6 inches thick with wire mesh or rebar reinforcement and control joints spaced to prevent random cracking. Fort Lauderdale’s high water table and sandy soils mean we often encounter subsidence issues in neighborhoods like Rio Vista and Las Olas Isles, where poorly compacted fill settles and cracks the slab within three to five years. We test substrate density with a nuclear density gauge, add base rock where needed, and pour with a 4,000 PSI mix with air entrainment for our wet climate - the spec is written into your quote so you know what you’re paying for.

Asphalt Driveways & Resurfacing

Asphalt paving uses hot-mix asphalt laid over a compacted aggregate base, with resurfacing adding a 1.5-2 inch overlay to an existing stable base. This is less common in Fort Lauderdale than in northern markets, but we still handle asphalt installs and overlays for commercial properties and homeowners in our Driveway & Pavers in Pompano Beach, Lauderdale Lakes, and Lauderhill who prefer the lower initial cost. We check the existing base for saturation damage - common after our heavy rain events - and will tell you honestly when resurfacing is a waste of money versus full replacement, because Clause 1 of The Haven Standard requires we put that assessment in writing before we quote.

Driveway Repair & Replacement

Driveway repair addresses isolated failures: cracked slabs, settled pavers, spalling concrete, or drainage pooling. Replacement removes the entire surface and base to rebuild from grade. In Fort Lauderdale’s flat terrain with poor natural drainage, we see a lot of repair calls from homes in Imperial Point and Middle River where water sits against the driveway edge and undermines the substrate. We diagnose with a visual inspection and probe testing, document the findings with photos you receive, and quote repair only if it will last - we won’t patch a driveway that needs replacement just to get the job.

Patios, Walkways & Pool Decks

Patios, walkways, and pool decks are horizontal hardscape surfaces using pavers, concrete, or natural stone, with pool decks requiring specific slip-resistant finishes and heat-reflective colors. Fort Lauderdale’s intense sun and chlorine exposure degrades standard sealers fast, so we specify solvent-based acrylic sealers with UV inhibitors for pool decks and breathable penetrating sealers for pavers that won’t trap moisture - a common cause of efflorescence, the white mineral bloom you see on poorly sealed surfaces. Every pool deck quote includes the specific sealer brand and reapplication interval in writing.

Brick Paver Driveway

Brick paver driveways use clay-fired units, typically in running bond or herringbone patterns, with a tighter joint than concrete pavers and a color that doesn’t fade because it runs through the body of the brick. We source from manufacturers including Belgard’s clay paver line and can match historic brick in neighborhoods like Sailboat Bend where the architectural review board requires material consistency. The install process is similar to concrete pavers but demands more precise edge restraint and joint sand specification - we use ASTM C144 mason’s sand with polymeric additive, not play sand, and we write that spec into your quote so there’s no substitution.

Stamped Concrete Driveway

Stamped concrete is poured concrete textured with rubber mats to mimic stone, brick, or slate, then colored with integral pigments and surface-applied release agents. The failure mode in Fort Lauderdale is almost always sealer degradation from UV and moisture, leading to color fading and surface whitening - we see this constantly on ten-year-old stamped driveways in our Driveway & Pavers in Plantation and Sunrise where the original contractor used a low-solids acrylic. We specify high-solids, UV-stable sealers with reapplication every 2-3 years, and we include the first reapplication schedule in your written scope so you know the true cost of ownership.

Driveway Sealing

Driveway sealing applies a protective coating to concrete, asphalt, or pavers to block UV, moisture, and automotive fluid penetration. In Fort Lauderdale’s climate, unsealed concrete spalls within five years and paver joints wash out every rainy season. We clean with surface cleaners and rotary washers, repair joints or cracks first, then apply the correct sealer type for your substrate - never a one-product-fits-all approach. A typical driveway sealing runs $250-$700 depending on square footage and prep needed, and we photograph the before condition so you can verify the work.

Brands We Service for Driveway & Pavers

We maintain active supplier relationships with Belgard and Techo-Bloc, two of the largest hardscape manufacturers in North America. With Belgard, we’ve installed their Cambridge Cobble, Dublin Cobble, and Catalina paver lines across Fort Lauderdale and Wilton Manors, and we stock their permeable paver options for homeowners in flood-prone areas like the Las Olas Isles who need to meet stormwater management requirements. Our quotes specify the exact Belgard product line, color, and pattern - not “Belgard pavers” generically - because the price difference between standard and permeable grades is significant and you deserve to know what you’re buying.

Techo-Bloc’s Blu 80 and Villagio lines are our go-to for modern Fort Lauderdale homes in neighborhoods like Flagler Village and Progresso, where clean lines and large format units match contemporary architecture. We’ve completed Techo-Bloc installs with their HD2 technology, which increases surface density for better stain resistance - a real consideration with the iron-rich well water that stains standard concrete in parts of Broward County. Whether your project calls for Belgard, Techo-Bloc, or any other manufacturer, we quote with the specific SKU, delivered price, and waste factor visible in writing.

Before

After

Signs You Need Driveway & Pavers Right Now

• Standing water after rain that doesn’t drain within 30 minutes. Pooling water indicates improper grade or settled substrate, and in Fort Lauderdale’s flat terrain it accelerates subbase erosion and undermines the entire surface. We see this most often in homes built during the 2000s construction boom where compaction standards were inconsistent - the fix is regrading with laser-level precision and possibly a French drain, which we assess and quote in writing.
• Cracks wider than a quarter inch that are growing seasonally. Hairline cracks are normal; widening cracks signal base failure or thermal movement beyond what the joint design accommodates. In our climate, the daily wet-dry cycle expands cracks faster than in drier regions, and water intrusion through cracks causes the steel reinforcement to oxidize and spall the concrete from within.
• Pavers that rock or settle when you walk or drive on them. Individual paver movement means the bedding sand layer has washed out or the base has settled unevenly - both progressive failures that spread to adjacent units. We find this frequently in Fort Lauderdale homes where sprinkler systems overspray the driveway, gradually undermining the joint sand that locks pavers in place.
• White powdery residue on paver or concrete surfaces that returns after cleaning. This efflorescence is calcium carbonate migrating through the substrate, caused by moisture trapped behind an impermeable sealer or inadequate drainage. It’s not just cosmetic - it indicates water is moving through your hardscape in ways that will eventually cause delamination or freeze-thaw damage if you’re in a microclimate that hits 40 degrees.
• Sealer that’s peeling, whitening, or completely gone after two years. Failed sealer exposes the substrate to Fort Lauderdale’s UV and salt air, and the uneven appearance hurts resale value in markets like Coral Ridge and Victoria Park where curb price matters. We strip failed sealer with biodegradable removers, diagnose why it failed, and specify a replacement compatible with your substrate and exposure - not whatever’s on sale this month.

Our Driveway & Pavers Process - Step by Step

1. 1
   Site visit and documented assessment. A uniformed technician arrives at your Fort Lauderdale home, photographs the existing condition from multiple angles, and probes the substrate with a steel rod to check for voids or saturation. You receive these photos with your written estimate, so there’s no dispute about what existed before we started.
2. 2
   Written flat-price quote with scope and specs. Under Clause 1 of The Haven Standard, we deliver a written price before any work starts - every time, on every trade. Your quote lists square footage, base depth and material, paver or concrete spec, sealer type, edge restraint detail, and warranty terms. “Call for a quote” is not an option here; the number is in writing or we don’t proceed.
3. 3
   Permit application and utility locate. We pull permits through the City of Fort Lauderdale or your municipality, and call Sunshine State One Call for underground utility marking. Permits and inspections are included in your flat price - no surprise fees when the inspector shows up.
4. 4
   Execution with photo documentation at each phase. Crews excavate or prepare the surface, install and test-compact base material, set forms or edge restraints, place and finish the surface, and apply sealer. Each phase is photographed and uploaded to your project record, which you access through a private link. This is standard, not an upgrade.
5. 5
   Final inspection, walkthrough, and warranty delivery. We meet you on site to review the work against the written scope, address any items under the 365-Day Done Right Promise, and deliver your written warranty. No final payment is due until you sign the completion certificate - another Haven Standard clause that protects your leverage as the customer.

How Much Does Driveway & Pavers Cost in Fort Lauderdale?

Driveway & Pavers Near Fort Lauderdale - Our Service Area

We install and repair driveways, patios, and hardscapes across Fort Lauderdale and adjacent communities including Wilton Manors, Oakland Park, Lauderdale Lakes, Lauderdale-by-the-Sea, Lauderhill, Pompano Beach, Plantation, Sunrise, Hollywood, Tamarac, and Margate. Typical response time for a free estimate is 24-48 hours from your call, with most projects in central Fort Lauderdale neighborhoods like Victoria Park, Coral Ridge, and Rio Vista scheduled within two weeks of quote acceptance. Crews are dispatched from our Fort Lauderdale operations center, not subcontracted from Miami or Palm Beach, which means our technicians know the local soil conditions, permit offices, and HOA requirements firsthand.

Frequently Asked Questions - Driveway & Pavers in Fort Lauderdale

Schedule Your Driveway & Pavers Service in Fort Lauderdale Today

Call (754) 254-7676 to schedule your free written estimate. A live person answers 24/7, and you’ll have a flat price with line-item specs within 48 hours of our site visit - no “call for a quote,” no hidden allowances, no work until you hold the number in writing. Grant Rowan and the team at Rowan Construction Group have delivered 4,000-plus projects under The Haven Standard since 2007, every one with a documented photo record and final cost within a few percent of the agreed price. Your driveway is too visible to guess on; get the written quote and know what you’re building before anyone breaks ground.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale since 2007.