Cambria Kitchen Remodeling Nationwide

Cambria Kitchen Remodeling: The Fort Lauderdale Owner’s Guide

Complete Cambria kitchen remodeling in Fort Lauderdale typically runs $14,000-$45,000 installed, with most projects in the $22,000-$34,000 range depending on cabinet footprint and whether the layout moves. We stock and install Cambria quartz surfaces across all current product lines, and we can usually template and fabricate within 5-7 business days of signed approval. Most Fort Lauderdale homeowners discover their kitchen needs more than surface-level work when seams lift near the sink, cabinets soften from repeated humidity cycles, or the original installer left no expansion gap for the coastal climate.

Call (754) 254-7676

Which Cambria Models This Applies To

Cambria’s quartz surfaces are not interchangeable by thickness alone. The standard 3 cm slabs (1.25 inches) dominate Fort Lauderdale kitchens because they span up to 120 inches without substrate support, but the thinner 2 cm line requires plywood decking that many older kitchens lack. We regularly see compatibility issues when homeowners in neighborhoods like Victoria Park or Coral Ridge try to drop a 3 cm Brittanicca or Bellingham onto cabinets originally built for laminate tops with no structural backing.

To identify your current surface, check the underside edge for a Cambria stencil mark, or measure the total thickness at an unfinished cutout. The product name matters for pattern matching: designs like Torquay and Swanbridge have veining that must be seamed with directional continuity, while solids like White Cliff run uniform. We source direct from Cambria’s distribution network, not through secondary fabricators, so the lot number and slab photography travel with your order. Rowan Construction Group Fort Lauderdale is an independent service provider, not affiliated with Cambria.

For cabinets, we also stock and install KraftMaid and Wellborn lines that pair correctly with Cambria’s weight load. A 3 cm quartz top runs 20-22 pounds per square foot; particleboard boxes from the 1990s often sag within two years under that mass in Florida’s humidity.

Signs Your Cambria Kitchen Remodeling Is Failing

• Seam separation at the sink or cooktop. This usually means the original installer used a polyester resin rather than color-matched epoxy, or the substrate shifted because no expansion gap was left against the backsplash. In Fort Lauderdale’s climate, cabinets expand and contract seasonally; rigid adhesives crack first.
• Soft or delaminating cabinet boxes beneath the counter. Particleboard swells when humidity breaches the laminate skin, which happens faster near the coast where salt air accelerates moisture infiltration. The cabinet loses its ability to hold screw torque, and the countertop settles unevenly.
• Water staining that does not wipe off the quartz surface. True Cambria quartz is non-porous, so persistent marks indicate etching from prolonged exposure to acidic cleaners or a failed seal at the sink flange letting water pool underneath. The surface itself may be intact while the substrate molders.
• Drawer and door misalignment that progresses monthly. Humidity-warped face frames or failed European hinge cups are the typical culprits. In older Fort Lauderdale homes, we find original hinges mounted into stripped MDF that crumbles with each adjustment attempt.
• Cracked or hollow-sounding tile backsplash. Movement between the countertop and wall stud spacing causes grout to fail first, then tile. The backsplash is often the visible symptom of a cabinet or substrate problem below.

Before

After

Replacement Cost & What’s Included

What drives the range: square footage of Cambria selected, edge profile complexity (ogee and waterfall edges add fabrication hours), whether plumbing or electrical locations move, and the condition of existing cabinetry. We deliver a written line-item quote before any work starts, every time, under Clause 1 of The Haven Standard. The price includes templating, fabrication, installation, sink and faucet reconnect, and haul-away of old materials. Our 365-Day Done Right Promise covers the installation; Cambria backs the material with their own limited lifetime warranty against manufacturing defects.

DIY or Call Us?

There’s a short list an owner can safely check: confirm the water shutoffs function, photograph the underside of the sink cabinet for moisture damage, and measure the existing countertop run with a tape measure to the nearest eighth inch. That information saves us time on the initial visit.

Everything else belongs to a crew. Cambria slabs weigh 900-1,200 pounds in a typical kitchen’s worth of material; they require a vacuum lift and three trained handlers to avoid fracture. Fabrication demands a CNC wet saw and polishing station that costs more than most Fort Lauderdale homes. And the sink cutout is a stress concentrator: a miscut voids the slab and the warranty. We carry the tools, the insurance, and the background-checked crew. Call (754) 254-7676 to schedule your free estimate.

FAQs