Cambria Windows & Doors Nationwide

Cambria Windows & Doors: The Fort Lauderdale Owner’s Guide

We stock and install Cambria-compatible windows and doors across Fort Lauderdale, with most replacement projects running $4,500-$15,000 for window replacement and $8,000-$25,000 for impact window installation depending on series, opening count, and whether the original frames are salvageable. Most standard-size Cambria sash, hardware, and sealed units are available same-day through our supply chain, and we carry common failure items on our trucks for Victoria Park and Coral Ridge service calls. Homeowners usually discover a problem when the top sash won’t stay raised, they feel salt-air draft around the weatherstrip, or condensation blooms between panes after a humid Fort Lauderdale morning - signs that the balance system, seal, or frame joint has reached end of life.

Call (754) 254-7676

Which Cambria Models This Applies To

Cambria’s window and door catalog spans several series, and matching the right part means reading the etched code in the glass corner or the sticker on the frame head. We service the Cambria Select Vinyl series, the Cambria Pro aluminum-clad line, and the Cambria Coastal impact-rated units that are common in Fort Lauderdale post-2017 code cycles. The Select Vinyl uses a constant-force balance with a 3/8-inch width; the Pro line switched to a block-and-tackle system in 2019, so a 2017 Pro sash won’t accept a 2021 balance cartridge. We verify this on site with a sash removal and measurement, not a visual guess.

OEM Cambria parts ship from the Midwest with a 10-14 day lead time, which is why we stock quality aftermarket equivalents from AmesburyTruth and Caldwell for balances, and Truth Hardware for locks and keepers. For sealed units, we source locally through Cardinal Glass in Fort Lauderdale to match the Low-E coating spec and argon fill. The aftermarket decision is straightforward: if the frame is sound and the part is wear-item hardware, equivalent-grade saves two weeks. If the part is the insulated glass unit itself, we match the OEM spacer and coating to preserve the original U-factor and SHGC rating.

Signs Your Cambria Windows & Doors Is Failing

• Sash drops or won’t stay open. The balance system - either constant-force coil or block-and-tackle - has lost tension. In Fort Lauderdale’s salt air, the metal pivot bar corrodes first, then the balance housing seizes. We replace both as a matched set because a new balance with a worn pivot fails again in months.
• Fog or condensation between panes. The edge seal on the insulated glass unit (IGU) has failed, letting humid Florida air breach the argon cavity. Once the desiccant saturates, the view stays cloudy. The IGU is a sealed factory assembly; it is not field-repairable and must be measured and reordered to the exact lite size.
• Draft around the frame perimeter. The compression weatherstrip has flattened or the sill track gasket has shrunk from UV exposure. Cambria’s coastal-grade silicone bulb holds up longer than standard vinyl fin, but after 8-10 years in direct south Florida sun, replacement is the fix, not adjustment.
• Lock won’t engage or latch is loose. The keeper has wallowed out its screw holes, or the cam has worn from repeated thermal expansion cycles. We see this often in east-facing Fort Lauderdale units where morning sun heats the aluminum fastener faster than the vinyl frame, working the screws loose over time.
• Frame corner separation or sill cap lift. The mechanical joint or fusion weld has stressed from building settlement or repeated hurricane shutter installation. This is structural; caulk is a temporary mask. We assess whether the sash can be reseated in a repaired frame or if full replacement is the honest call.

Before

After

Replacement Cost & What’s Included

For Fort Lauderdale Cambria window and door work, our installed pricing follows the ranges below. Every quote is flat, written, and itemized before work starts - Clause 1 of the Haven Standard.

What drives the range: unit size, floor height (ladder vs. lift), whether the existing frame is square and salvageable, and if the original installation used proper shimming and flashing. We photograph the opening before quote, so the price you sign is the price you pay. No change order is processed without your signature - that’s the discipline that has kept our projects within a few percent of the agreed number across 4,000-plus jobs since 2007. The 365-Day Done Right Promise applies to all window and door work: if it is not done right, we make it right.

DIY or Call Us?

There is safe homeowner inspection and there is work that belongs to a crew with the right tools and liability coverage.

You can safely: vacuum the sill track, lubricate the lock with a dry Teflon spray, and check the weep holes (the small slots in the sill) for mud-dauber nests or paint blockage - common in Fort Lauderdale’s older Victoria Park homes where painters have been generous with the sprayer.

Do not attempt: sash removal on a unit with a failed balance (the spring is under tension and can release unpredictably), IGU replacement (the glass is heavy, the seal is factory-spec, and the warranty is voided by field assembly), or frame disassembly. We’ve replaced sashes that homeowners cracked by prying with a putty knife. The hardware is not forgiving, and the cost of a damaged frame exceeds the service call.

Call (754) 254-7676 to schedule your free estimate. We’ll bring the measurement tools, the parts catalog, and a written price before any work starts.

FAQs