IKO Driveway & Pavers Nationwide

IKO Driveway & Pavers: The Fort Lauderdale Owner’s Guide

IKO driveway and paver systems in Fort Lauderdale typically run $7,000-$18,000 installed for paver driveway replacement, with repair work starting around $400. We stock IKO-compatible paver components and can usually source same-day for common failure patterns in Broward County’s coastal climate. Most Fort Lauderdale homeowners discover the problem when settling creates pooling after storms, or when individual pavers shift out of plane along the driveway edge - both signs that the base layer or edge restraint has failed beneath the IKO surface.

Call (754) 254-7676

Which IKO Models This Applies To

IKO’s hardscaping line includes the Cambridge, Roman, and Holland series pavers, plus the permeable Enviro-Line for drainage-critical lots in Fort Lauderdale’s low-lying areas. The part you need depends on the series stamp cast into the paver edge, usually visible on the side face of an intact unit. Cambridge and Roman share the 60mm thickness but use different edge restraint profiles - Cambridge’s beveled edge requires a low-profile PVC restraint, while Roman’s tumbled edge pairs with standard aluminum edging. The Holland series runs 80mm and needs a deeper stake system, especially where the water table sits high, which is common east of Federal Highway.

We carry both OEM IKO edge restraints and compatible aftermarket equivalents from Belgard and Techo-Bloc. The aftermarket options match IKO’s dimensional specs but differ in UV stabilizer load - critical in Fort Lauderdale, where 230-plus days of direct sun degrades standard PVC restraints in four to six years. For the substrate, we use a modified Class II base rather than IKO’s specified standard aggregate, because Fort Lauderdale’s sandy soils shift during wet season saturation. Measure twice, write it down, then say it once - we document the series, the restraint type, and the base modification on every quote.

Signs Your IKO Driveway & Pavers Is Failing

• Individual pavers rock under foot or tire pressure. This usually means the bedding sand layer has washed out or compacted unevenly, often where downspouts discharge directly onto the surface. The paver itself is intact, but the support beneath it has failed.
• Pooling water that lingers more than thirty minutes after rain. In Fort Lauderdale’s flat terrain, this indicates base settlement or a failed permeable joint that should be draining through to the substrate. Left unaddressed, it accelerates freeze-thaw damage even in our mild winters.
• Edge pavers migrating outward, creating a ragged border. The edge restraint has pulled its stakes or the PVC has cracked at stress points. This spreads fast - one failed foot of restraint can destabilize six to eight feet of adjacent pavers within a single rainy season.
• White haze or efflorescence blooming on the surface. Soluble salts migrating through the paver body from the base layer. It’s cosmetic but signals moisture is moving through the system in ways the original base design didn’t anticipate, often from over-irrigation or grade changes.
• Joint sand completely gone, with weeds establishing in gaps. Polymeric sand breaks down under UV and pressure-washing. In Fort Lauderdale, pressure-washing crews often blast out the stabilizing polymers, leaving voids that collect organic debris and root systems.

Before

After

Replacement Cost & What’s Included

The spread on replacement work comes down to three factors: square footage, base condition, and access. A 600-square-foot driveway with intact Class II base and clear side-yard access sits at the lower end. Same footprint with failed base requiring full excavation, or tight access between a foundation wall and a pool cage, pushes toward the upper range. Under Clause 1 of the Haven Standard, your written quote itemizes the paver unit cost per square foot, the base material and depth, the edge restraint linear footage, and the joint sand type - no bundled “materials” line item. The 365-Day Done Right Promise covers the installation. Every visit includes a documented photo record, standard.

DIY or Call Us?

An owner can safely check three things: confirm the paver series stamp, measure the affected area, and photograph the edge condition for comparison. Do not attempt to reset pavers or recompact base material without understanding what’s beneath - Fort Lauderdale’s fill soils often hide undocumented utility runs, and hand-compacting over a shallow gas line or irrigation main creates liability that exceeds any savings.

Where DIY reliably fails: guessing at base depth without a probe, reusing saturated bedding sand, or installing standard PVC restraint where IKO’s spec calls for heavy-duty aluminum. The paver looks fine for six months, then the same failure pattern repeats with additional settling. We carry IKO-compatible edge restraints, polymeric sands rated for South Florida UV exposure, and the plate compactor sized for residential access constraints. Call (754) 254-7676 to schedule your free estimate - we’ll scope the base condition, identify the series, and give you a written price before any work starts.

FAQs