Boral Roofing Nationwide

Boral Roofing: The Fort Lauderdale Owner’s Guide

Boral concrete and clay tile roofing repair in Fort Lauderdale typically runs $600-$2,500 installed, depending on whether we’re matching individual tiles, replacing underlayment, or addressing battens and flashings. We stock Boral-compatible tiles, fasteners, and flashing profiles for same-day repair on most common series. Most Fort Lauderdale homeowners discover a Boral roofing issue after a hard rain, when water spots appear on ceiling drywall, or after walking the roof and finding cracked tiles or displaced hip and ridge caps that the previous owner never addressed.

Call (754) 254-7676

Which Boral Models This Applies To

Boral’s U.S. roofing line includes concrete tiles in the Saxony Slate, Saxony Shake, and Villa profiles, plus clay tiles in the Barcelona, Mission, and Two-Piece Mission series. The critical compatibility gotcha in Fort Lauderdale is profile height: Boral’s concrete Saxony Slate sits at a different pitch than their clay Mission tile, so hip and ridge caps from one series will not seat properly on another. We verify by checking the underside stamp, which lists the plant code, date, and series, and by measuring the exposure dimension (the visible face after overlap) against Boral’s current spec sheet.

OEM Boral tiles come from their Lake Wales, Florida plant or their Henderson, Nevada facility. For discontinued colors, we source from Boral’s designated aftermarket partners or match from our salvage inventory pulled from local reroofs in Victoria Park and Coral Ridge. The aftermarket decision hinges on color stability: some third-party clay tiles fired at lower temperatures fade differently under Fort Lauderdale’s UV load, so we document the source on the written quote. Under Clause 1 of the Haven Standard, that source is named before work starts.

Signs Your Boral Roofing Is Failing

• Cracked or broken tiles, especially along hips and ridges. Boral concrete tiles are porous; once the surface glaze cracks, salt air and freeze-thaw cycles (yes, Fort Lauderdale gets them in January) open the crack wider. Water then reaches the underlayment, which was never meant to be the primary barrier.
• Water stains on interior ceilings that appear after wind-driven rain. This usually means the headwall or sidewall flashing has separated from the tile profile. Boral’s interlocking design depends on that flashing sitting in a specific channel; if the channel is clogged or the flashing was face-nailed instead of step-flashed, water runs behind.
• Loose tiles that rattle or shift when walked. The battens (the horizontal wood strips the tiles hang on) may be rotting from moisture trapped beneath the tile. In Fort Lauderdale’s humidity, untreated pine battens can degrade in 15-20 years even when the tiles above look fine.
• Granule or color wash in gutters. On Boral concrete tiles, this signals surface erosion from acid rain and salt exposure. The tile is thinning; replacement is a question of when, not if.
• Sagging at the eave or visible daylight through the soffit. The eave closure, the metal strip that seals the first course of tile, may have corroded or blown loose in a storm. This is common after hurricane-season wind events in Fort Lauderdale.

Before

After

Replacement Cost & What’s Included

Tile roof repair in Fort Lauderdale runs $600-$2,500, with most Boral-specific jobs landing between $800 and $1,800. The range depends on three factors: tile availability (current production vs. discontinued match), underlayment condition (if we lift tiles and find compromised felt, we document it with photos before proceeding), and access (steep pitches or second-story work require additional safety rigging).

Every Boral repair quote from Rowan Construction Group Fort Lauderdale is a flat written price with line-item breakdown: tiles or parts by unit count, underlayment by square footage if needed, labor by crew-day, and permit fees if the repair exceeds 25% of the roof area per Florida Building Code. We pull permits when required and pass inspection before final invoice. The 365-Day Done Right Promise covers the repair; if the match fails or the leak returns, we make it right. Measure twice, write it down, then say it once.

DIY or Call Us?

A homeowner can safely walk the roof to look for obvious cracked tiles or missing hip caps, but we recommend doing so from a ladder at the eave rather than traversing the field. Boral tiles break under point loading, and a clay Mission tile shatters unpredictably. Do not step on the tile face; if you must walk it, step on the lower third where the tile overlaps the batten below.

What goes wrong fast: removing a single Boral tile without disturbing its neighbors requires lifting the overlapping course above, which locks in place. Forcing it cracks adjacent tiles. Replacing underlayment or battens means removing a field of tiles, stacking them by location so the color variation stays random, and reinstalling with the correct gauge (the horizontal spacing between battens, which varies by Boral series). The fasteners matter too: Boral specifies corrosion-resistant nails of a specific length; standard roofing nails back out in salt air. For the documented photo record and a repair that matches, call (754) 254-7676.

FAQs