Boral Fence Installation Nationwide

Boral Fence Installation: The Fort Lauderdale Owner’s Guide

Boral fence installation in Fort Lauderdale typically runs $3,500-$9,000 for a complete vinyl or composite perimeter system, depending on lineal footage, soil conditions, and whether we’re working around mature root systems common in neighborhoods like Victoria Park. We stock Boral-compatible posts, rails, and pickets for same-day starts on most standard heights, and we carry the post-base brackets that fail first in our sandy, high-water-table soil. Most homeowners discover a Boral fence problem when a section starts leaning after a tropical downpour, or when they notice rail-to-post connections have pulled loose where the original installer skipped the concrete collar or used the wrong fastener grade for coastal exposure.

Call (754) 254-7676

Which Boral Models This Applies To

Boral’s fencing line in the U.S. market centers on vinyl and composite systems sold through regional distributors, not big-box retail. The most common Boral-compatible systems we see in Fort Lauderdale are the 5-inch and 6-inch flat-top privacy styles with 2-inch by 3.5-inch top and bottom rails, plus the ranch-rail three-rail configuration used for larger properties west of I-95. To identify your exact system, check the post cap underside for a molded date code and series letter, or measure the wall thickness of a picket at the bottom where it’s least weathered. Boral OEM rails use a .060-inch wall thickness in the 6-foot privacy height; thinner aftermarket equivalents at .040 inch will sag in our heat within two seasons. We source both Boral-specified material and a vetted equivalent from Ply Gem’s Bufftech line when the original distributor lead time stretches past what a customer can tolerate. The Haven Standard requires us to document which grade we propose and why, so the written quote lists the manufacturer, wall thickness, and fastener spec before anyone digs.

Signs Your Boral Fence Installation Is Failing

• Post lean after rain. Fort Lauderdale’s sandy loam drains fast but offers poor lateral support; if the concrete footing was poured as a narrow cylinder rather than a flared base, the post tilts under wind load. We find this most often on fences installed without our local 24-inch minimum depth in older Coral Ridge installations.
• Rail separation at the post. The Boral rail-to-post connection relies on a bracket with two #10 by 1.5-inch screws; in our salt air, standard steel fasteners corrode and the rail pops free. We upgrade to 316 stainless on every repair.
• Picket warping or discoloration. Boral’s vinyl formulations are UV-stabilized, but south-facing exposures in Rio Vista or Las Olas Isles can exceed the design threshold after eight to ten years. Warping usually means the substrate was a recycled-content blend rather than virgin PVC.
• Gate drag or latch misalignment. Gate posts take the dynamic load; if the original installer skipped the diagonal brace or used a 4×4 post instead of the spec’d 5×5, the gate frame racks and the latch misses. This is almost always an installation error, not a Boral defect.
• Concrete footing exposed or undermined. Our summer thunderstorms move soil; if the footing was poured flush with grade rather than 2 inches below with a taper, water undercuts the base. In Victoria Park, where mature live oaks drop heavy limbs, we also see footings cracked from impact.

Before

After

Replacement Cost & What’s Included

The full-fence range reflects three variables: soil stability (we test auger resistance before quoting), access for our mini-excavator between structures, and whether we’re removing an old wood fence with embedded posts or starting on bare ground. Every quote from Rowan Construction Group Fort Lauderdale is a flat written price with line-item breakdown: material by brand and spec, labor by phase, and disposal as a separate line. Under Clause 1 of the Haven Standard, that price is fixed; if we hit limestone or a buried irrigation line, the change order is written and signed before we proceed. Our fence work carries the 365-Day Done Right Promise, and the documented photo record on every visit shows footing depth, bracket detail, and final plumb before we leave.

DIY or Call Us?

There’s honest work a homeowner can do safely: verify the post lean with a level, photograph the bracket corrosion for our reference, and check whether the gate hinge screws are backing out. What we don’t recommend is digging out and resetting a 80-pound concrete footing in sandy soil with a high water table, or attempting to tension a sagging gate frame without knowing whether the post itself has rotated. The bracket fasteners on Boral systems are not structural lag bolts; if they’ve failed once, the post hole is compromised and needs re-excavation to a wider base. We’ve been called to Fort Lauderdale jobs where a homeowner’s weekend repair turned into a full section replacement because the second post was disturbed. Measure twice, write it down, then say it once - that’s how we scope it, and it’s cheaper than doing it twice. Call (754) 254-7676 and we’ll put the repair price in writing before anyone picks up a shovel.

FAQs