CGI Kitchen Remodeling Nationwide

CGI Kitchen Remodeling: The Fort Lauderdale Owner’s Guide

CGI kitchen remodeling in Fort Lauderdale typically runs $14,000-$45,000 installed, depending on cabinet grade, layout changes, and whether you’re keeping existing appliances. We stock CGI-compatible cabinet lines, hardware, and trim packages, and we can usually measure and quote within 48 hours. Most Fort Lauderdale homeowners realize their CGI kitchen needs attention when cabinet boxes swell from humidity, drawer glides stick, or the original particleboard substructure starts sagging after 10-15 years in the coastal climate.

Call (754) 254-7676

Which CGI Models This Applies To

CGI cabinets fall into several product tiers, and the replacement approach differs by series. The Builder’s Choice line uses ½-inch particleboard boxes with thermofoil doors, common in 2005-2015 construction throughout Fort Lauderdale’s Coral Ridge and Galt Ocean Mile condos. The Signature Series upgrades to ¾-inch plywood boxes with solid-wood door frames, and the Designer Collection adds soft-close hardware and full-extension drawer boxes. To identify your series, check the hinge cup bore pattern (35mm for most CGI lines), the drawer box construction (dovetail vs. stapled), and the interior stamp, usually found on the upper hinge side of the door.

We source OEM CGI replacement doors and drawer fronts through the manufacturer’s distribution network, but we also stock quality aftermarket equivalents from KraftMaid and Wellborn when the original line has been discontinued. The compatibility gotcha in Fort Lauderdale: CGI’s thermofoil doors manufactured before 2012 used a different substrate adhesive that delaminates faster in high-humidity environments. If your doors are peeling at the edges, matching the year matters more than matching the color swatch.

Signs Your CGI Kitchen Remodeling Is Failing

• Swollen cabinet box bottoms. The particleboard substrate absorbs moisture from mopping and Fort Lauderdale’s ambient humidity, expanding until the shelf pin holes wallow out and shelves sag. We see this most in base cabinets under sinks where the plumbing chase was never properly sealed.
• Sticking drawers and misaligned doors. Drawer glides lose their nylon bearings after 8-12 years of salt-air exposure, and hinge cups strip out of the particleboard. The underlying cause is usually hardware fatigue combined with box flex, not just a loose screw.
• Thermofoil peeling or bubbling. The PVC film separates from the MDF core when adhesive breaks down, accelerated by heat from self-cleaning oven cycles and south-facing windows in Victoria Park homes. Once bubbling starts, the door is not repairable.
• Cracked or separated face frames. Butt-jointed frames on older CGI lines open at the joints as seasonal humidity swings stress the wood-to-particleboard connection. This is structural, not cosmetic, and it transfers load unevenly to the box.
• Foul odor from sink cabinets. Degraded particleboard releases formaldehyde and trapped organic matter when the laminate skin cracks. In Fort Lauderdale’s climate, this means water has been getting in long enough to compromise the box integrity.

Before

After

Replacement Cost & What’s Included

CGI kitchen remodeling in Fort Lauderdale breaks down as follows:

The range depends on three factors: box construction (particleboard vs. plywood), door material (thermofoil vs. painted hardwood), and whether we’re working within existing footprints or moving plumbing and electrical. Under Clause 1 of The Haven Standard, we deliver a written flat price before any work starts, with material brands listed by name and no bundled charges. Every CGI kitchen project carries our 365-Day Done Right Promise, and you receive a documented photo record of the existing condition, the rough-in, and the finished installation.

DIY or Call Us?

There’s safe DIY and then there’s false economy. A homeowner can verify measurements, check for level with a 4-foot spirit level, and photograph existing conditions for comparison, but cabinet installation involves structural load transfer, plumbing and electrical coordination, and precise scribe work against Fort Lauderdale’s notoriously out-of-plumb condo walls. The danger isn’t dramatic, it’s cumulative: a cabinet hung ⅛ inch out of level compounds across a run, and a misaligned plumbing rough-in behind a sink base turns a weekend project into a drywall repair.

We bring laser levels, cabinet jacks, and the experience of 4,000-plus projects where the written scope matched the finished price. If you’re weighing DIY against professional installation, call (754) 254-7676 and we’ll review your photos at no charge. Measure twice, write it down, then say it once.

FAQs