Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Windows & Doors: The Fort Lauderdale Owner’s Guide
We stock and install ViewLux-compatible windows and doors across Fort Lauderdale, with most replacement units available same-day and installed within one to two business days. Typical installed pricing runs $4,500-$15,000 for full window replacement and $8,000-$25,000 for impact-rated installations, depending on unit count, series, and whether the original frames are salvageable. Most ViewLux owners first notice trouble when a sash won’t stay open, a lock won’t engage, or they feel Gulf Stream humidity pushing through a weatherstrip that has hardened past recovery.
Which ViewLux Models This Applies To
ViewLux produces several series that circulated through South Florida between the late 1990s and mid-2010s, and the part you need depends on which generation you own. The ViewLux 5000 and 7000 series used a proprietary tilt-latch and balance system that is not cross-compatible with the later ViewLux Elite or ViewLux Pro lines, which switched to a standard constant-force balance and a universal tilt-latch footprint. Check the edge of the sash or the header track for a stamped series number; if the label is sun-faded, measure the balance tube diameter. The 5000/7000 series used a 5/8-inch tube, while Elite and Pro moved to 3/4-inch. We carry both OEM ViewLux hardware and quality aftermarket equivalents from AmesburyTruth and Caldwell, which match the original specs at roughly 60 percent of OEM cost. For impact-rated units, we stick with OEM or Miami-Dade-approved equivalents only, because the NOA documentation must chain back to the original certification. If you’re in Victoria Park or Coral Ridge, we’ve likely serviced your exact series before.
Signs Your ViewLux Windows & Doors Is Failing

- Sash drops or won’t stay open. The coil balance or block-and-tackle system has lost tension, usually from corrosion in the balance shoe after years of Fort Lauderdale salt air. This is the most common ViewLux failure we see.
- Visible moisture between glass panes. The insulated glass unit seal has failed, allowing humid Gulf air to enter the airspace. Once fog appears, the IGU is done; it cannot be resealed, only replaced.
- Lock won’t engage or feels loose. The keeper has shifted due to frame expansion from heat cycling, or the lock mechanism itself has worn where the zinc casting meets the steel cam. Either way, the unit is no longer secure.
- Draft even when closed. Compression weatherstrip has taken a set and no longer rebounds, or the pile weatherstrip at the sash edges has flattened. In Fort Lauderdale’s UV exposure, this happens faster than the manufacturer spec suggests.
- Frame corners opening or caulk cracking. Thermal expansion has stressed the mechanical joints, or the original installation lacked backer rod and the sealant has failed. Water intrusion follows quickly after.
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale homes, ViewLux window replacement typically falls in the $4,500-$15,000 range for standard units and $8,000-$25,000 for impact-rated installations, based on our project history across Broward County. The spread depends on unit count, whether we’re working within existing drywall returns or replacing the full frame, and if the original installation used proper flashing that we can tie into. Every quote we write lists parts and labor separately, with the glass spec, frame finish, and hardware brand named line by line. Under Clause 1 of the Haven Standard, that written price is fixed; no work proceeds on a change until the change order is signed. Our 365-Day Done Right Promise covers the installation, and the glass itself carries the manufacturer’s warranty, which we register for you.
DIY or Call Us?

There’s a short list of things a ViewLux owner can safely check: verify the lock is clear of paint buildup, confirm the weep holes at the sill aren’t clogged with debris, and inspect the weatherstrip for obvious gaps. Beyond that, replacement of balances, IGUs, or full sashes involves working at height with units that weigh 40 to 80 pounds, and impact-rated glass requires two trained installers minimum. We’ve responded to calls in Rio Vista and Las Olas where a homeowner removed a sash alone, lost grip on the tempered lite, and ended up with a patio full of granules and a unit that was no longer in production. For the part match and the install, call (754) 254-7676 and we’ll schedule a free estimate with a written price before any work starts.
FAQs
In South Florida’s climate, a properly installed ViewLux unit typically delivers 15 to 20 years of service before the balance system or IGU seal fails. Salt air and UV exposure accelerate weatherstrip degradation, so coastal properties in Harbor Beach or Lauderdale-by-the-Sea often see the shorter end of that range. Call (754) 254-7676 for an exact quote on replacement - estimates are free.
Once an insulated glass unit shows fog or moisture between panes, it cannot be repaired. The seal failure is permanent, and the desiccant inside the spacer is saturated. We replace the IGU while retaining your existing frame if it’s structurally sound, which cuts cost versus full unit replacement. Call (754) 254-7676 for an exact quote - estimates are free.
A typical single-unit replacement takes two to three hours on site, assuming the opening is square and the original flashing is intact. Full-home replacement of 10 to 15 units spreads across two to three days, with one day for removal and rough opening prep, one for installation, and a half day for trim and sealant. Call (754) 254-7676 to schedule your free estimate.
We stock common ViewLux balances, tilt latches, and weatherstrip profiles on our Fort Lauderdale service trucks, and we maintain relationships with regional distributors for same-day IGU and sash orders on the 5000, 7000, Elite, and Pro series. If your unit is discontinued, we fabricate a compatible replacement from our verified aftermarket sources. Call (754) 254-7676 to confirm availability for your model.
Rowan Construction Group Fort Lauderdale is an independent service provider and is not affiliated with ViewLux. We also stock parts for KraftMaid, Cambria, and Silestone products.
Ready to get a written price before anyone picks up a tool? Call (754) 254-7676 to schedule your free estimate. We’ll bring the part catalog, measure your openings, and leave you with a line-item quote you can screenshot and compare. Measure twice, write it down, then say it once.
Written by Grant Rowan, Owner, Rowan Construction Group - Fort Lauderdale, FL at Rowan Construction Group Fort Lauderdale, serving Fort Lauderdale and nearby areas.







Before
After
Before
After
Before
After