Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Bathroom Remodeling: The Fort Lauderdale Owner’s Guide
ActiveYards bathroom remodeling in Fort Lauderdale typically runs $9,000-$28,000 installed, depending on whether we’re refreshing a guest bath in Coral Ridge or reconfiguring a master suite in Harbor Beach with waterproof composite decking and aluminum framing. We stock ActiveYards-compatible shower enclosures, privacy partitions, and coastal-grade hardware, and we can usually measure and quote within 48 hours. Most owners first realize something’s wrong when the aluminum frame starts weeping white oxidation at the joints, or when the composite wall panels no longer sit flush after a season of Fort Lauderdale’s salt-heavy humidity cycles.
Which ActiveYards Models This Applies To
ActiveYards builds bathroom systems under several product lines, and the part you need depends on which generation you’re working with. The Serenity series uses 2-inch extruded aluminum framing with a proprietary snap-fit joint; Sanctuary upgraded to a 2.5-inch box frame with integrated weep channels in 2019. Check the inside edge of the door header for a stamped series mark, or measure the frame depth with a tape measure if the label’s corroded off, which happens faster in Fort Lauderdale than inland markets.
We carry OEM-grade replacement panels and hardware, but we’ve also vetted aftermarket equivalents from Coastal Bath Solutions that match the anodized finish spec and carry the same 10-year structural warranty at roughly 15% less. The gotcha is the Serenity door catch: the OEM uses a 3/16-inch striker pin, while most aftermarket kits ship with 1/4-inch. Swap without checking and the latch either won’t engage or will chew the aluminum receiver inside two years. We measure on site and source accordingly.
Signs Your ActiveYards Bathroom Remodeling Is Failing

- White powder forming at frame corners. That’s aluminum oxide blooming where the anodized layer has been breached, usually from chloride exposure in Fort Lauderdale’s coastal air. It looks cosmetic but signals the frame wall is thinning; left alone, the joint will loosen and the panel will rack.
- Composite wall panels bowing or cupping. ActiveYards’ PVC-capped composite resists moisture better than raw MDF, but the cap layer can delaminate if steam penetrates at a seam. Once the core swells, the panel won’t return to flat, and the warranty won’t cover it because the failure point is installation, not material.
- Door dragging or catching mid-swing. The continuous hinge is aluminum with a nylon bushing; the bushing wears first, then the hinge pin starts wallowing the frame hole. By the time you feel the drag, the frame is often damaged enough that hinge replacement alone won’t fix it.
- Water pooling outside the shower footprint. ActiveYards systems rely on a vinyl compression sweep at the door bottom. In Fort Lauderdale’s hard water, calcium builds on the sweep lip and breaks the seal. The sweep is replaceable, but if the water has been escaping for months, the subfloor may be compromised.
- Hardware finish flaking or turning green. The standard brushed nickel is PVD-coated, not solid. Within three miles of the Intracoastal, we’ve seen the coating fail in under four years if the bathroom isn’t ventilated aggressively. Upgrading to Coastal’s marine-grade 316 stainless hardware adds cost but eliminates the issue.
Before
AfterReplacement Cost & What’s Included
For a full ActiveYards bathroom remodel in Fort Lauderdale, we quote $9,000-$28,000 as a flat written price with line-item breakdown: demolition and haul-away, substrate inspection and repair, new ActiveYards or equivalent framing and panels, hardware, fixtures, and finish trim. A panel-and-hardware refresh on a sound existing frame runs lower; a gut with reconfiguration, plumbing relocation, and waterproof composite decking underfoot runs higher.
What drives the spread: the condition of what’s behind the walls, whether we’re matching existing tile outside the ActiveYards footprint, and if the owner wants the marine-grade hardware upgrade. Under Clause 1 of the Haven Standard, that written price is delivered before any work starts. No change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation; manufacturer warranties run 10 years on structure, 5 on finish. Every visit includes a documented photo record, standard.
DIY or Call Us?

An owner can safely check the series stamp, measure frame dimensions, and inspect the sweep and hinges for visible wear. What goes wrong fast is the demo: ActiveYards panels are structural, not decorative, and the frame is tensioned into the opening. Pull a panel without relieving the frame and you’ll spring the header, turning a $400 hardware job into a $9,000 full replacement.
We don’t recommend DIY on anything involving the frame joints or waterproofing layer. The weep screed behind the base track has to terminate correctly into the pan flange; miss by a quarter inch and water finds it. Call (754) 254-7676 and we’ll measure, source the right parts, and quote it in writing. Measure twice, write it down, then say it once.
FAQs
In Fort Lauderdale’s coastal climate, a properly installed ActiveYards system with standard hardware lasts 12-15 years; with marine-grade hardware and aggressive ventilation, 18-20. The limiting factor is usually the anodized frame at the joints, not the composite panels. Call (754) 254-7676 for an exact quote on upgrading your hardware during replacement - estimates are free.
Panel replacement, sweep swaps, and hinge bushing kits are viable repairs if the frame is sound and the substrate behind it is dry. We verify both with a moisture meter and borescope before quoting repair; if the frame is oxidized or the subfloor reads above 16% moisture, repair is false economy. Call (754) 254-7676 and we’ll inspect and give you a written repair-versus-replace comparison at no charge.
Most Fort Lauderdale jobs run 5-8 business days from demo to final, assuming no plumbing relocation. Add 2-3 days if we’re moving the toilet or shower valve, or if the building department requires a wet-area inspection, which some HOAs in Victoria Park and Rio Vista mandate. We pull permits when required and schedule inspections so the job doesn’t stall. Call (754) 254-7676 to schedule your free estimate.
We stock common hardware, sweeps, and hinge kits for both Serenity and Sanctuary series. Full panels and frame sections are job-ordered to color and size; with Fort Lauderdale’s humidity, we don’t carry raw stock that could warp in the van. Most special orders arrive in 3-5 business days. Call (754) 254-7676 and we’ll confirm what’s in stock for your model.
Rowan Construction Group Fort Lauderdale is an independent service provider and is not affiliated with ActiveYards. We also stock and install parts for KraftMaid, Cambria, and Silestone products.
Ready to get a written price before anyone picks up a tool? Call (754) 254-7676 to schedule your free estimate. We’ll review your ActiveYards system, measure for the right parts, and deliver a flat written quote with line-item breakdown - no bundled charges, no surprises.
Written by Grant Rowan, Owner, Rowan Construction Group - Fort Lauderdale, FL at Rowan Construction Group Fort Lauderdale, serving Fort Lauderdale and nearby areas.







Before
After
Before
After
Before
After