Belgard Driveway & Pavers Nationwide

Belgard Driveway & Pavers: The Fort Lauderdale Owner’s Guide

Belgard driveway and paver installation in Fort Lauderdale typically runs $7,000-$18,000 for a complete paver driveway, with most residential jobs falling in the $9,500-$14,000 range depending on substrate condition and pattern complexity. We stock Belgard-compatible edge restraints, bedding sand, geotextile fabric, and joint stabilizing compounds on our Fort Lauderdale trucks, and we can usually assess and quote same-day. Most homeowners realize their Belgard surface is failing when they notice shifting pavers after heavy rain, weeds pushing through joints that used to stay tight, or pooling water where the grade used to drain clean.

Call (754) 254-7676

Which Belgard Models This Applies To

Belgard’s residential lines break into a few families, and the part you need depends on which one is on your Fort Lauderdale property. Dublin Cobble, Bergerac, and Mega-Lafitt are the three we see most often in Victoria Park and Coral Ridge, where older lots get resurfaced rather than expanded. Check the paver edge for a stamped “Belgard” logo and a two-digit mold code - if it’s worn, measure the unit thickness: Dublin Cobble runs 60mm, Mega-Lafitt is 80mm, and mixing the two on a repair patch creates a trip hazard you’ll feel every time you walk it.

We source OEM Belgard where the color batch still runs, but we’ve also vetted quality aftermarket equivalents from Techo-Bloc for cases where Belgard discontinued a specific shade. The catch in Fort Lauderdale’s market is UV fade: a paver that matched under showroom lighting can read two shades different after three years of south Florida sun. We always lay a sample patch and let the customer walk it at 9 a.m. and 4 p.m. before ordering the full lot. That’s the kind of compatibility gotcha that doesn’t show up in a part number.

Signs Your Belgard Driveway & Pavers Is Failing

• Pavers rocking or tilting underfoot. The bedding sand layer beneath has washed out or compacted unevenly, usually from water intrusion through failed edge restraints. In Fort Lauderdale, this accelerates after the summer storm season when runoff volume spikes.
• Weeds or grass growing through joints. The polymeric sand or joint stabilizer has degraded, which happens faster here because our rainfall is heavy and frequent enough to break down organic binders in lower-grade compounds.
• Pooling water that didn’t pool before. Subgrade settlement or root intrusion from live oaks and mahogany trees common to Fort Lauderdale neighborhoods has created low spots. The pavers themselves may be fine; the base is the problem.
• Chipped or spalling paver faces. This is usually impact damage from lawn equipment, but in coastal Fort Lauderdale properties we also see salt air corrosion on the surface aggregate in Belgard’s lower-density mixes.
• Sunken areas near the garage or walkway edge. The concrete haunch or plastic edge restraint has cracked, letting the paver field migrate outward. We see this most on driveways poured over old concrete that wasn’t properly broken out first.

Before

After

Replacement Cost & What’s Included

The spread comes down to three things: how much of the base needs recompaction, whether we can match the existing Belgard color run, and access. Tight lots in Rio Vista with mature ficus hedges mean we hand-carry more material, which shows in the labor line. Every quote we write lists parts and labor separately, with the Belgard series named, the bedding sand spec, and the compaction test standard. Under Clause 1 of The Haven Standard, that price is fixed once signed; no change order, no surprise. Our 365-Day Done Right Promise covers the workmanship, and we leave you with a photo record of the substrate condition before we cover it.

DIY or Call Us?

There’s no high-tension danger here like a garage door spring, but Belgard paver repair goes wrong in slower, more expensive ways. A homeowner can safely pull a few pavers to check sand depth or verify whether the edge restraint is plastic or concrete - that’s useful intelligence you can tell us over the phone. Where DIY fails is in base compaction: a plate compactor rental won’t hit 98% standard Proctor density without the right moisture content, and we’ve seen Fort Lauderdale homeowners lay beautiful pavers that settle into washboard patterns within eight months because the limerock base was too dry when compacted.

Weed control is another trap. Roundup between joints works until it doesn’t, and overspray stains Belgard’s lighter colorways permanently. If you’re more than two symptoms deep from our list above, the fix usually involves pulling material you can’t put back without new inventory. Call (754) 254-7676 and we’ll scope it in person, write the price, and schedule when you’re ready. Measure twice, write it down, then say it once - that’s how we work.

FAQs