Tremron Roofing Nationwide

Tremron Roofing: The Fort Lauderdale Owner’s Guide

We stock and install Tremron-compatible roofing components in Fort Lauderdale, with most Tremron tile and paver roof repairs running $400-$1,800 installed depending on the component and access. Tremron’s concrete roof tiles and paver systems are common across Broward County, particularly in homes built between 1995 and 2015 where the original install is now hitting the 20-30 year mark. Most Fort Lauderdale homeowners discover a Tremron roofing failure after a hard rain, when water shows up at the ceiling edge, or when tiles crack audibly underfoot during routine gutter cleaning.

Call (754) 254-7676

Which Tremron Models This Applies To

Tremron’s roofing line for the Florida market centers on three families: the Slate Profile concrete roof tile, the Barrel Tile series (S-Tile and Double-S variants), and the Cool Roof energy-rated line introduced around 2012. The part you need depends on which of these is on your roof, and the difference matters for fitment.

Here’s how to identify yours: flip a loose tile or check the attic for a stamped code on the underside. Tremron tiles carry a date stamp and series mark near the lug (the interlocking edge). The Slate Profile runs 17 inches long with a flat, dimensional face; Barrel Tiles are 18 to 20 inches depending on the S-curve depth. The Cool Roof series adds a reflective granule surface that reads lighter in color even on “earth tone” tiles. If your original install was done with Tremron’s Fort Lauderdale-distributed stock, the pallet tags may still be in the garage or shed; the SKU prefix tells us everything.

On OEM versus aftermarket: Tremron still manufactures replacement tiles for series going back to the late 1990s, but color drift is real. A 2004 Terra Cotta is not a 2024 Terra Cotta after two decades of South Florida UV. We source OEM when the lot color is still active, but we’ve also vetted two aftermarket concrete tile producers whose profiles match Tremron’s lug spacing and water channel geometry without the six-week factory lead time. Under Clause 1 of the Haven Standard, we put both options in writing with the color match risk noted before you choose.

Signs Your Tremron Roofing Is Failing

• Cracked or chipped tiles at the rake edge or valley. Tremron concrete tiles are tough in the field but vulnerable at the cut edges where installers trimmed for hips and valleys. In Fort Lauderdale, thermal cycling plus salt air accelerates micro-fractures; what starts as a hairline opens to a water path in one or two storm seasons.
• Water staining at the ceiling perimeter, not the center. This usually points to a failed hip or ridge cap, or to the closure strip (the foam or mortar seal between tile courses) rather than a field tile. Tremron’s barrel profiles depend on that seal more than flat systems do.
• Loose tiles that shift when you walk the roof. The mortar or foam adhesive bed has separated, often from original install skimping or from deck movement in older Fort Lauderdale homes with tongue-and-groove sheathing rather than plywood. A loose tile in wind is a missile.
• Efflorescence, the white powder on tile faces. This is mineral leaching from the concrete body, accelerated by our humidity. It signals the tile’s surface seal is degrading; the tile won’t fail tomorrow, but its water absorption rate is climbing and freeze-thaw (yes, even in Florida) will spall the face within a few years.
• Underlayment visible in the tile gaps. The tile has slipped, broken, or been displaced. On Tremron installs with battens, this can also mean corroded batten nails from the pre-2008 pressure-treatment era. We see this regularly in Victoria Park and Coral Ridge homes where the original 1990s installs used galvanized fasteners that didn’t hold up to coastal air.

Before

After

Replacement Cost & What’s Included

For Fort Lauderdale Tremron roofing work, our installed pricing breaks down as follows:

The spread on repair work comes from three factors: how many tiles, whether the underlayment is compromised, and access. A second-story roof over a pool cage in Rio Vista takes longer than a single-story ranch in Imperial Point with clear perimeter. We quote flat: the price includes removal of failed tiles, underlayment patch or replacement as needed, new fasteners rated for coastal exposure, and replacement tiles with the best available color match. Every quote is written before work starts, with material brands listed by name and no bundled mystery charges. Our 365-Day Done Right Promise covers the workmanship; Tremron’s material warranty (where OEM) runs 50 years on the tile body but does not cover color fade, which we note in writing so there’s no confusion later.

DIY or Call Us?

Here’s where we’re direct. A homeowner can safely walk the roof to photograph damage from the ridge, check the attic for leak points, and clear debris from valleys. Do not step on a cracked tile; the structural integrity is gone and the fall-through risk is real on older 1x sheathing. Do not attempt to lift and re-bed a Tremron barrel tile yourself; the foam adhesive sets fast and the tile geometry requires a practiced hand to seat without cracking the adjacent course.

More importantly: concrete roof tiles in Fort Lauderdale are heavy, typically 900-1,100 pounds per square (100 square feet). If you’re seeing multiple failures, the problem may be the deck, not the tile. We’ve opened roofs in Wilton Manors where the tile was fine but the plywood beneath had turned to oatmeal from a slow leak the owner never felt inside. That’s a structural issue, not a parts swap. Call (754) 254-7676 and we’ll scope it, photograph what we find, and put the price in writing before a tool comes out.

FAQs