Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Bathroom Remodeling Across Coral Springs
A full bathroom remodel in Coral Springs typically runs $9,000-$28,000, with most projects permitted, inspected, and completed in four to six weeks. We serve the full city, from Ramblewood and Coral Springs Country Club to the neighborhoods off Sample Road and University Drive, with crews dispatched from our South Florida coordination office. Call (754) 254-7676 to schedule your free written estimate - we’ll bring a line-item quote, not a sales pitch.
Why Rowan Construction Group Fort Lauderdale Is Coral Springs’s Preferred Bathroom Remodeling Company
We’ve completed bathroom remodels across Coral Springs’s master-planned subdivisions since 2007, and the pattern is consistent: homes built between the late 1960s and early 1990s hide the same systemic issues behind their tile and stucco. Our crews know what to expect when they open a 1980s CBS wall. That familiarity saves time and keeps quotes honest.
Our Coral Springs customers leave reviews mentioning the photo record we provide after every visit - documentation of what we found, what we did, and what the next step costs. We don’t ask for trust; we show the work.
Response time to Coral Springs averages same-week scheduling for estimates, with project starts typically within two to three weeks of signed contract. Dispatch and scheduling are coordinated from our Miami office, but the crew that arrives at your door lives and works in Broward County.
The Haven Standard, which governs every Rowan project, requires a written price before any work starts and a signed change order before any deviation. In Coral Springs, where the building department enforces code compliance harder than neighboring Margate or Tamarac, that discipline isn’t optional - it’s what keeps permits moving and inspections passing.
Our Bathroom Remodeling Services in Coral Springs

Full Bathroom Remodeling
We strip to studs, assess what’s behind the tile, and rebuild with modern waterproofing, proper ventilation, and circuits that carry today’s load. In Coral Springs’s 1970s-1990s CBS stock, this almost always means upgrading the original 15-amp bathroom circuit to 20-amp GFCI protection, replacing corroded cast-iron drains with PVC, and installing a properly sloped shower pan with pre-slope, membrane, and flood test - all documented in your written scope and priced before we start. A full bathroom remodel in Coral Springs runs $9,000-$28,000.

Walk-In Showers & Shower Remodeling
We remove the old enclosure, evaluate the framing and subfloor, and build a curbless or low-threshold walk-in with linear drain or center drain to suit the existing plumbing layout. Coral Springs’s high water table means we pay particular attention to pan sealing and weep-hole function - standing water in open excavations is routine here, and moisture management inside the wall is critical. Walk-in shower installation runs $4,500-$12,000.

Tub-to-Shower Conversion
Converting an original 1980s tub to a walk-in shower is one of our most common Coral Springs requests. The work involves removing the tub, evaluating the drain location (often requiring a trap and vent adjustment), and building a new waterproofed enclosure. We write allowances into every contract for subfloor repair, because the original drain seal has often been leaking slowly into the CBS slab for years. Tub-to-shower conversion runs $3,500-$10,000.

Vanities, Tile & Fixtures
We install floating and furniture-style vanities with quartz or solid-surface tops, porcelain or ceramic tile in patterns from subway to large-format, and fixtures from Kohler, Moen, and Delta in finishes that match existing hardware or start fresh. In Coral Springs’s humid climate, we specify mold-resistant grout and adequate exhaust ventilation - a 50 CFM minimum, ducted to exterior, not into the attic.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Coral Springs
We source through fifty-plus vetted brands, and for bathroom work we typically specify Kohler and Delta fixtures for their parts availability in Broward County, Moen for valve reliability in hard-water conditions, and Blanco for undermount sinks. We don’t inflate quotes with boutique brands you can’t get serviced locally. Every item in your written estimate carries a model number, a spec sheet, and a warranty term - so you can compare apples-to-apples with any competitor’s quote. Bring us another contractor’s written estimate and we’ll review it line by line at no charge.
Common Bathroom Remodeling Problems We See in Coral Springs Homes

- Failed drain pans and soft subfloors. The original shower pans in 1970s-1990s Coral Springs homes were often hot-mopped asphalt or early vinyl membranes with a 20-30 year lifespan. We find saturated subfloors and compromised framing regularly once the tile comes off.
- Undersized electrical circuits. Original 15-amp bathroom circuits won’t carry a modern GFCI outlet, LED vanity, and exhaust fan simultaneously. Coral Springs inspectors require the upgrade to 20-amp service with dedicated ground - we build this into every quote as a standard assumption, not a surprise.
- Stucco and moisture intrusion at exterior walls. Coral Springs’s 60-plus inches of annual rainfall, concentrated June through October, accelerates delamination behind tile on exterior bathroom walls. We inspect with moisture meters and specify cement-board substrate with liquid-applied membrane, not paper-faced drywall.
- Unpermitted prior work triggering mandatory remediation. Coral Springs’s building department markets itself as a “model city” with aggressive enforcement. Unpermitted plumbing or electrical discovered during any inspection forces full code-compliant redo, not grandfathering. We pull permits on every job and document the approval chain.
Pricing for Bathroom Remodeling in Coral Springs, FL
Every project receives a flat written price with line-item scope before any work begins. No change proceeds without a signed change order - the Haven Standard discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007.
| Service | Price Range in Coral Springs |
|---|---|
| Full Bathroom Remodeling | $9,000-$28,000 |
| Small Bathroom Remodel | $5,000-$12,000 |
| Walk-In Shower Installation | $4,500-$12,000 |
| Tub-to-Shower Conversion | $3,500-$10,000 |
| Shower Replacement | $3,000-$8,500 |
| Bathroom Vanity Installation | $800-$3,000 |
Factors that move the number: wall relocation (plumbing stack access), subfloor or framing repair, electrical panel capacity, tile material and pattern complexity, and fixture grade. We write allowances for concealed conditions into every contract - typically 10-15% of base scope - so surprises are priced and approved in writing before we touch them, not sprung mid-job.
Call (754) 254-7676 for your free written estimate. We’ll inspect, photograph, and return a line-item quote you can screenshot and compare.
We Also Serve Cities Near Coral Springs

Our crews work throughout western Broward County, including Coral Springs neighbors in Margate, Pompano Beach, Plantation, and Deerfield Beach. The same written-price discipline, photo documentation, and permit-ready workmanship apply across every city we serve. If you’re comparing contractors across these markets, note that Coral Springs’s stricter code enforcement typically adds permit and inspection steps that looser jurisdictions skip - we price that accurately upfront.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Bathroom Remodeling in Coral Springs

Yes. Coral Springs requires a building permit for any bathroom remodel involving plumbing, electrical, or structural modification, which covers virtually every project beyond cosmetic surface replacement. The city’s “model city” enforcement means inspectors verify GFCI protection, exhaust ventilation, and waterproofing compliance at rough-in and final - no grandfathering for pre-code work. We pull permits as standard on every job and include the permit cost in your written quote. Call (754) 254-7676 and we’ll confirm exactly what your project triggers.
Failed drain pans, soft subfloors, and undersized electrical circuits are the three most common findings in 1970s-1990s Coral Springs homes. We gutted a 1979 CBS hall bath in the Ramblewood subdivision and found the original drain pan had been leaking into the subfloor for years, plus a 15-amp circuit feeding the vanity wall that wouldn’t carry a modern GFCI and exhaust fan. We wrote the framing repair and a new 20-amp circuit as a priced change order, got the homeowner’s signature before touching anything, and passed the city’s rough-in inspection on the first visit. That is how we handle every concealed condition - documented, priced, approved in writing.
We write concealed-condition allowances into every contract, typically 10-15% of base scope, with specific unit prices for common discoveries - subfloor repair per square foot, circuit upgrades per run, framing repair per linear foot. If we find nothing, you pay nothing beyond the base quote. If we find something, the price is already agreed and the change order is signed before work proceeds. Under Clause 1 of the Haven Standard, no work starts on a change until the paperwork is done - the administrative discipline Haven acquired Rowan for, and the reason our projects finish within a few percent of the number you agreed to.
Yes, and it’s one of our most common requests in Coral Springs’s original subdivisions. The conversion requires removing the tub, evaluating drain location and venting, and building a new waterproofed enclosure - often with a linear drain if the existing plumbing layout allows. We write subfloor repair allowances into every tub-to-shower contract because the original drain seal has usually been compromised. Tub-to-shower conversion runs $3,500-$10,000 in Coral Springs. Call (754) 254-7676 to schedule an inspection and written quote.
We typically specify Kohler and Delta for faucets and shower valves, Moen for thermostatic and pressure-balance controls, and Blanco for undermount and apron-front sinks. All carry local parts availability and manufacturer warranties we document in your scope. We don’t specify brands you can’t get serviced in Broward County. Every model number, finish code, and warranty term appears in your written estimate - compare it line-by-line against any competitor’s quote, or bring us theirs for a free second opinion.
Ready to price your project? Call (754) 254-7676 to schedule your free written estimate. Our Bathroom Remodeling team will inspect, photograph, and return a line-item quote with no deposit required to review. The 365-Day Done Right Promise applies to every Coral Springs project - if it’s not done right, we make it right, backed by The Haven Standard in writing, not a handshake.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Coral Springs since 2007.







Before
After
Before
After
Before
After