Barrette Driveway & Pavers Nationwide

Barrette Driveway & Pavers: The Fort Lauderdale Owner’s Guide

We stock and install Barrette-compatible driveway and paver components in Fort Lauderdale, with most replacement jobs running $5,000-$14,000 for driveway replacement and $3,500-$11,000 for paver patio work depending on substrate condition and square footage. Most Barrette paver resets and base repairs are quoted same-day and scheduled within 48 hours. The typical call starts with a homeowner noticing shifted or sunken pavers after a rain season, or water pooling where the base has washed out beneath a Barrette installation that was laid five to ten years ago.

Call (754) 254-7676

Which Barrette Models This Applies To

Barrette Outdoor Living manufactures pavers under several distribution lines, most commonly found in South Florida through the Barrette Stonegate and Barrette Heritage series, with the Stonegate line using a 60mm thickness and the Heritage running 80mm for vehicular loads. The critical compatibility gotcha in Fort Lauderdale is base depth: Barrette’s residential spec calls for 6 inches of crushed concrete base in most markets, but the sandy, poorly draining soils in neighborhoods like Victoria Park and Coral Ridge often need 8-10 inches plus a geotextile layer to prevent the settling we see repeatedly. Check the edge restraint label; Barrette’s older aluminum edging (pre-2018) corrodes faster in salt air than the current PVC version. We carry both OEM Barrette edge restraints and commercial-grade SureEdge equivalents that match the profile exactly. If your pavers were installed by a previous owner and you’re unsure of the series, measure a single paver thickness and snap a photo of any stamped logo on the edge restraint. We’ll cross-reference it against Barrette’s 2015-2024 spec sheets, which we keep on file.

Signs Your Barrette Driveway & Pavers Is Failing

• Pavers rocking underfoot or tire. The bedding sand has eroded or the base has settled unevenly, usually from inadequate compaction during original install or water intrusion through failed edge restraint.
• Water pooling that didn’t pool before. The base has washed out in sections, creating voids beneath the paver surface; in Fort Lauderdale’s flat terrain, even a quarter-inch drop traps water and accelerates joint sand loss.
• Weeds or grass growing through joints. Polymeric sand has degraded or was never properly installed; UV exposure and pressure washing strip it faster here than in northern climates.
• Edge pavers tilting outward or separating from the field. The edge restraint has failed, typically from corrosion (aluminum) or heave from root intrusion common in mature Fort Lauderdale neighborhoods.
• Surface spalling or color fading in patches. Barrette’s concrete pavers absorb moisture; freeze-thaw isn’t the issue in Fort Lauderdale, but salt air and chlorine pool runoff cause surface degradation that looks similar.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: how much base material needs removal and recompaction, whether we hit a high water table (common east of Federal Highway), and if permits are required for driveway apron work connecting to the street. Under Clause 1 of the Haven Standard, you get a written price before anyone picks up a shovel, with material brands listed by name and labor itemized separately. Our 365-Day Done Right Promise covers the installation; paver manufacturers warranty the product itself against defects.

DIY or Call Us?

There’s no high-tension danger with pavers the way there is with garage door springs, but DIY resets go wrong predictably. An owner can safely check: whether the edge restraint is loose by hand, if joints are visibly empty of sand, and whether water drains within 30 minutes of a hard rain. Where DIY fails is compaction. A rented plate compactor without moisture-controlled lifts will leave you with the same settlement in 18 months, and we’ve pulled out plenty of homeowner resets in Fort Lauderdale where the base was never screeded level to begin with. We stock crushed concrete base, polymeric sand, and edge restraint on our trucks for Barrette profiles. Call (754) 254-7676 and we’ll scope it, photograph what we find, and put the number in writing before any work starts.

FAQs