Cambridge Pavers Driveway & Pavers Nationwide

Cambridge Pavers Driveway & Pavers: The Fort Lauderdale Owner’s Guide

We stock and install Cambridge Pavers-compatible driveway and paver systems in Fort Lauderdale, with paver driveway installations typically running $7,000-$18,000 depending on pattern complexity and base preparation. Most Cambridge Pavers projects we quote can start within two weeks of written approval, and we carry common repair materials on our trucks for settled or shifted sections. Homeowners usually notice the problem first as a wobble under tire pressure, a visible dip after rain, or sand washing out from between the stones - signs that the bedding layer or edge restraint has failed beneath the surface.

Call (754) 254-7676

Which Cambridge Pavers Models This Applies To

Cambridge Pavers manufactures several product lines that appear regularly in Fort Lauderdale installations: the ArmorTec paving stones (the through-color line with the surface-hardening process), the Olde English cobble-style series, and the Sherwood ledgestone step and wall system often integrated into driveway borders and retaining walls. The critical compatibility point is the edge restraint system - Cambridge’s own Pave-Mor or a compatible PVC or aluminum restraint - which must match the paver thickness (typically 60mm for residential driveways, 80mm for commercial or heavy-vehicle applications in Fort Lauderdale’s Coral Ridge or Victoria Park neighborhoods where older homes get modernized hardscapes).

To identify what you have, look for the Cambridge logo stamped on the paver edge or check your original project documentation for the series name and color blend. If you lack paperwork, measure a single paver’s thickness and note whether the color runs through the full body or sits as a surface layer - ArmorTec is through-color, while some economy lines are face-mix only. We source OEM-compatible bedding sand, polymeric joint sand, and edge restraint from Cambridge’s distribution network, though we also stock quality aftermarket equivalents from Belgard and Techo-Bloc when lead times or project timing demands it. The Haven Standard requires us to list the manufacturer on your written quote, so you’ll see the brand name and spec before anyone picks up a tool.

Signs Your Cambridge Pavers Driveway & Pavers Is Failing

• Individual pavers rock or tilt when you drive over them. This usually means the bedding sand layer beneath has eroded or compacted unevenly, often from water intrusion through failed joint sand - common in Fort Lauderdale after heavy summer storms when drainage was skimped during original installation.
• Sand washes out from joints, leaving gaps between stones. Polymeric joint sand breaks down under UV exposure and pressure-washing; once it’s gone, the interlock that distributes vehicle weight across the pattern fails, and pavers start to migrate independently.
• Visible sinking or hollowing in wheel paths or near the garage apron. The base material - typically crushed concrete or limestone screenings - has settled or was insufficiently compacted in lifts during construction, a problem we see frequently in Fort Lauderdale’s Victoria Park where fill soils vary block by block.
• Edge pavers pull away from the border, creating a ragged perimeter. The edge restraint has failed, either from spike corrosion in our salt-air environment or from ground movement where the restraint was pinned into organic soil rather than compacted base.
• White haze or efflorescence on the paver surface that doesn’t clean off. Calcium hydroxide migrating from the base or bedding material; it’s cosmetic but signals moisture moving through the system in ways that will eventually undermine the bedding layer.

Before

After

Replacement Cost & What’s Included

For Cambridge Pavers driveway repair or partial replacement in Fort Lauderdale, we typically quote $2,500-$7,500 for localized failure repair (section removal, base recompaction, and reinstatement) and $7,000-$18,000 for full driveway replacement with new Cambridge or equivalent pavers. The range depends on three factors: how much base material must be excavated and recompacted, whether we can match your existing Cambridge color blend (discontinued colors require full-area replacement for consistency), and whether your municipality requires a permit for the work - Fort Lauderdale generally does for new hardscape over 200 square feet, though simple repair often does not.

Every quote is flat-priced with line items: demolition and disposal, base material and compaction, bedding sand, pavers by series and color, polymeric joint sand, edge restraint, and sealer if requested. Under Clause 1 of the Haven Standard, that written price is delivered before any work starts. Our 365-Day Done Right Promise covers the installation, and you’ll receive a documented photo record of the excavation, base condition, and finished work as standard deliverables.

DIY or Call Us?

There’s honest work a homeowner can do: sweep fresh polymeric sand into open joints after a thorough cleaning, or reset a single loose paver that still has intact bedding beneath it. Where DIY goes wrong is in the base - pulling up stones without checking the underlying compaction, adding loose sand instead of screeding a proper bedding layer, or skipping the plate compactor that sets the interlock. In Fort Lauderdale’s climate, an improperly reset section will show failure again within one rainy season, and you’ll have paid for materials twice.

We carry Cambridge-compatible bedding sand, joint sand, and edge restraint on our trucks, and we own the compaction equipment that most homeowners won’t rent for a small job. Call (754) 254-7676 to schedule your free estimate - we’ll scope the failure, photograph the base condition, and give you a written price before any work starts. Measure twice, write it down, then say it once.

FAQs