Kohler Windows & Doors Nationwide

Kohler Windows & Doors: The Fort Lauderdale Owner’s Guide

We stock and install Kohler-compatible windows and doors in Fort Lauderdale, with most replacement projects running $4,500-$15,000 for window replacement and $8,000-$25,000 for full impact window installation depending on series and frame count. Kohler window and door hardware, seals, and sash components are typically available same-day through our supplier network, and we carry common failure parts on our trucks for Victoria Park and Coral Ridge service calls. Most owners discover a problem when the sash won’t stay open, the multipoint lock won’t engage, or they feel salt-air draft around a frame that used to seal tight.

Call (754) 254-7676

Which Kohler Models This Applies To

Kohler window and door systems span several product generations, and the part you need depends on when your unit was manufactured. Pre-2015 Kohler wood-clad double-hungs used a proprietary balance cartridge that differs in length and pound rating from the current extruded vinyl line. Check the sash label, usually found on the top edge of the lower sash or the hinge side of a door panel, for a model prefix: KD for double-hung, KC for casement, KPD for patio door. The label also lists the glass unit size and the balance pound rating, which must match within two pounds or the sash will creep.

We source OEM Kohler hardware through authorized distribution, though for certain discontinued balance systems we spec quality aftermarket equivalents from Truth Hardware or Caldwell that meet the original torque spec. The aftermarket route saves roughly 15-20% on parts cost and carries the same one-year installation warranty under our Haven Standard. One compatibility gotcha in Fort Lauderdale: the coastal series multipoint lock faceplate changed from a 16mm to a 20mm backset in 2018, and the wrong replacement will leave your deadbolt misaligned with the strike.

Signs Your Kohler Windows & Doors Is Failing

• Sash drops or won’t stay open. The coil balance or block-and-tackle system has lost tension. In Fort Lauderdale’s humidity, the balance shoe lubricant degrades faster than inland specs, and we see this failure mode regularly in homes east of Federal Highway where salt air accelerates corrosion.
• Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed, breaking the argon fill and fogging the view. Once the desiccant saturates, the glass is done; there is no repair that restores the original thermal performance.
• Draft around the frame or sill. Compression weatherstrip has flattened or the sill track gasket has pulled away. On Kohler patio doors, the adjustable sill cap can be reset, but if the pile weatherstrip is compressed past 1/8 inch, replacement is the only fix.
• Multipoint lock won’t throw or feels gritty. The locking points are out of alignment with the keepers, or the gearbox has stripped from forcing a misaligned door. Continued operation will damage the master lock body, which is a more expensive repair.
• Frame corner separation or sealant failure. The structural silicone or backer rod has aged out, common in south-facing exposures where daily thermal cycling exceeds 40 degrees. Water intrusion at the corner joint will rot the subsill if not addressed.

Before

After

Replacement Cost & What’s Included

For Fort Lauderdale homes, window replacement runs $4,500-$15,000 depending on unit count, frame material, and whether impact-rated glass is required per the Florida Building Code. Impact window installation, the standard for most of Broward County, ranges $8,000-$25,000 for a typical single-story home. Hardware-only repairs, balance replacement, or sash swaps fall lower, usually $300-$800 per opening when the frame and glass are sound.

Our written quote itemizes parts, labor, and any code-required upgrades, such as converting non-impact units to HVHZ-rated assemblies in coastal zones. Under Clause 1 of the Haven Standard, that price is fixed before work starts; no change proceeds without a signed change order. Every installation includes a documented photo record of the opening condition, the install sequence, and the finished seal, delivered as standard. Our 365-Day Done Right Promise covers the workmanship; manufacturer defects are handled through Kohler’s warranty channel, which we manage on the owner’s behalf.

DIY or Call Us?

An owner can safely inspect the sash label, check for visible sealant gaps, and confirm whether the lock points align with the keepers. What we do not recommend: removing a sash with a failed balance, adjusting multipoint lock backset, or attempting IGU replacement. The balance system stores significant spring tension, and a released coil can damage the frame or cause injury. IGU replacement requires a cleanroom environment and proper desiccant fill; field attempts always fail within one season.

Rowan Construction Group Fort Lauderdale is an independent service provider, not affiliated with Kohler Co. We have no incentive to sell you a full replacement when a hardware repair will solve it. Call (754) 254-7676 to schedule your free estimate; we’ll inspect the unit, name the exact part, and give you a written price before any work starts.

FAQs