PGT Construction Service Nationwide

Why Fort Lauderdale Homeowners Choose PGT Construction

Rowan Construction Group Fort Lauderdale provides PGT in Fort Lauderdale as independent construction service for homeowners across Broward County, specializing in the repair, replacement, and installation of PGT WinGuard and Wincore impact-rated windows and doors. We are not affiliated with or authorized by PGT Innovations; we are an independent contractor with direct sourcing channels for genuine PGT replacement parts and 4,000-plus projects of documented experience in South Florida’s High Velocity Hurricane Zone. Call (754) 254-7676 for a written estimate before any work begins.

Call (754) 254-7676

Fort Lauderdale’s position in a High Velocity Hurricane Zone means every window and door product must carry a separate HVHZ product approval, a stricter standard than neighboring Palm Beach County requires. PGT Innovations built its reputation on impact-rated assemblies engineered specifically for this code environment, and Fort Lauderdale’s housing stock, dominated by CBS construction from the 1960s through 1980s, presents a steady demand for both retrofit upgrades and repair of existing PGT installations. The salt-laden air off the Atlantic and the Intracoastal accelerates corrosion on hardware and pitting on aluminum frames, particularly in waterfront neighborhoods like Las Olas Isles and Rio Vista where we do repeat work, as well as on PGT Construction in Oakland Park, FL properties near the water. That environmental reality is why we stock OEM PGT rollers, weatherstripping, and glass units locally rather than ordering from a warehouse three counties away.

Why Trust Rowan Construction Group Fort Lauderdale for Your PGT Construction?

Our crews handle PGT aluminum and vinyl systems daily, not seasonally. Grant Rowan, who leads the Fort Lauderdale operation, trained in the building trades program at Los Angeles Trade-Technical College before years of residential and light commercial work taught him to read plans fast without missing details. He grew up watching crews retrofit older homes in the hills of Beverly Hills, where tight sites and careful sequencing were non-negotiable. That background translates directly to Fort Lauderdale’s mature neighborhoods like Victoria Park and PGT Construction in Wilton Manors, FL, where older lots, established landscaping, and zero-lot-line conditions demand the same precision. Measure twice, write it down, then say it once.

We maintain direct relationships with PGT parts distributors, which means we can source genuine OEM hardware, laminated glass units, and frame components without the delays that plague contractors who treat every brand as interchangeable. For warranty-safe service, we document every step with the photo record included as standard on every visit, not as an upgrade. Our technicians are background-checked and uniformed; a live person answers calls 24/7. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool, and no change proceeds without a signed change order, the administrative discipline that has kept our projects within a few percent of the agreed cost since 2007.

Common PGT Construction Problems We Fix in Fort Lauderdale

• Flat-spotted and corroded stainless steel impact rollers in PGT WinGuard sliding glass doors. The stainless steel rollers PGT specifies for its impact-rated sliding doors resist corrosion in most environments, but Fort Lauderdale’s salt-laden air and wind-driven rain flatten and pit them faster than inland climates. Once the roller profile degrades, the door drags, the track wears, and the locking mechanism falls out of alignment. We see this most often in homes within a few blocks of the Intracoastal or ocean, where daily salt exposure is unavoidable.
• Vinyl window sash warping and frame bowing from prolonged UV exposure. PGT WinGuard Vinyl Windows and Wincore 500 Series units use multi-chamber vinyl extrusions, but years of South Florida sun can soften the profile enough that sashes lose square contact with the frame. The result is water infiltration at corners, failed compression weatherstripping, and the whistling sound owners report during northeasterlies. We replace the affected sashes or full frames depending on the degree of deformation.
• Adhesive failure in laminated impact glass interlayers. The polyvinyl butyral layer that bonds PGT’s laminated impact glass can delaminate after repeated thermal cycling, producing visible bubbling, cloudiness, or a hazy perimeter ring. This is not a cosmetic issue; delamination compromises the glass’s ability to remain intact under impact. We see this pattern in west-facing windows that absorb afternoon heat and in units installed before improved edge-sealing methods became standard.
• Severe pitting and corrosion on aluminum window and door frames near coastal exposures. PGT WinGuard Aluminum Impact Windows rely on anodized or painted finishes for salt-air protection, but once the finish is breached, corrosion propagates rapidly and can undermine structural screw points. We assess whether localized frame repair is viable or whether the unit has reached the threshold where replacement with a current-spec PGT assembly is the sounder investment.
• Failed weatherstripping and compression seals in aging PGT units. The bulb seals and pile weatherstripping that maintain PGT’s design pressure rating degrade with UV and ozone exposure. Replacement seems minor, but improper seal selection can drop the assembly below its rated wind-load capacity. We match OEM spec or equivalent Florida Product Approved alternatives.

Before

After

PGT Parts & Our Repair-vs-Replace Approach

We source OEM PGT replacement hardware, rollers, weatherstripping, balances, and glass units whenever available, because these parts preserve the original wind-load rating and the fit tolerances engineered into the frame. For obsolete or low-availability PGT models, we turn to high-grade aftermarket components that meet or exceed Florida Product Approval standards.

The decision point is straightforward: when repairing a failing unit would cost more than half the price of a new impact-rated assembly, we recommend replacement and explain why in the written quote. We do not bundle charges or obscure the math. Our local parts inventory covers the most common PGT WinGuard and Wincore components, which means most repairs move within a few days, not weeks. Call (754) 254-7676 and we’ll review your specific PGT product line and condition.

Our PGT Service Process - Step by Step

1. 1
   Diagnosis with documentation. We inspect the PGT unit, identify the series and approximate install date, photograph the condition, and note any code-compliance gaps. The customer receives the photo record before we leave the site.
2. 2
   Written quote with line-item pricing. Under The Haven Standard, Clause 1, the price is written before any work starts. The quote lists parts by source, OEM or aftermarket, labor hours, and any permit requirements tied to HVHZ product approval.
3. 3
   Repair or install with signed change order. If the scope changes during work, no change proceeds without a signed change order. This is the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs.
4. 4
   Testing and verification. We operate every moving component, check lock engagement, verify weatherstrip compression, and confirm the unit meets or exceeds its original design pressure rating where repair was performed.
5. 5
   Warranty documentation. The 365-Day Done Right Promise applies. The customer leaves with a written warranty, the final photo record, and a copy of the signed change order if applicable.

PGT Products We Service & Install in Fort Lauderdale

We work with PGT WinGuard Vinyl Windows, PGT WinGuard Aluminum Impact Windows, PGT WinGuard Sliding Glass Doors, and PGT Wincore 500 Series Vinyl Windows. Our Fort Lauderdale inventory includes OEM-spec impact rollers, laminated glass units in common sizes, frame corner keys, and compression seals for these product families. For full replacement projects, we source current-production PGT assemblies with active HVHZ product approval, which is required in Broward County and disqualifies materials legal in non-HVHZ jurisdictions. We also perform related work that often accompanies PGT window and door projects: Impact Window Installation, Window Replacement, Kitchen Remodeling, and Roof Repair where the envelope is being upgraded as a system.

We Also Service These Brands

Our sourcing depth across fifty-plus vetted brands means we are not single-brand dependent. We regularly install KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures on projects where PGT window and door work is one component of a larger renovation. That breadth keeps our quotes honest; we know the real numbers because we buy the materials regularly.

FAQs - PGT Construction Service in Fort Lauderdale

Is Rowan Construction Group Fort Lauderdale authorized by PGT?

No. We are an independent PGT service provider, not affiliated with or authorized by PGT Innovations. We source genuine PGT parts through independent distributors and maintain our own technical expertise with PGT product lines.

Do you use genuine PGT parts for repairs?

Yes, whenever available. We source OEM PGT replacement hardware, rollers, weatherstripping, balances, and glass units to preserve the original wind-load rating and fit. For obsolete or low-availability models, we use high-grade aftermarket components that meet or exceed Florida Product Approval standards, and we disclose the source in the written quote.

Can you replace just one pane of impact glass in a PGT WinGuard window?

In most cases, yes. PGT WinGuard windows use laminated impact glass that can be replaced as a unit without disturbing the frame, provided the frame and sash are structurally sound. We assess the surrounding vinyl or aluminum for warping or corrosion that would compromise the new glass seal. Call (754) 254-7676 for an exact quote on your specific unit; estimates are free.

My PGT sliding glass door is very hard to open. Do I need a whole new door?

Usually not. The most common cause is corroded or flat-spotted stainless steel impact rollers, a failure mode we see constantly in Fort Lauderdale’s salt-air environment. Replacing the roller assembly, cleaning the track, and realigning the frame typically restores smooth operation at a fraction of replacement cost. We recommend full replacement only when the frame itself is corroded beyond repair or when the unit no longer meets current HVHZ standards.

How do I know if my PGT windows need repair or full replacement?

Repair is viable when the frame is structurally intact, parts are available, and the repair cost is less than half the price of a new impact-rated assembly. Replacement makes sense when there is severe frame corrosion, widespread delamination, or when the existing unit predates current HVHZ product approval and your project triggers a code upgrade. We document the condition and explain both options in the written quote.

Can you repair PGT windows that were damaged in a hurricane?

We can assess and repair or replace PGT units damaged by wind-borne debris, pressure cycling, or water intrusion. The extent depends on whether the damage is limited to glass, hardware, and seals, or whether the frame has been structurally compromised. We were called to a 1990s Fort Lauderdale home where the PGT WinGuard sliding glass door had rollers that were completely flat-spotted, making the door nearly impossible to slide. After disassembling the door, we replaced the corroded stainless rollers with OEM-spec stainless assemblies, cleaned the track, and adjusted the frame; the door now glides smoothly and locks securely. In another job, after a tropical storm, we replaced three laminated glass units in PGT WinGuard windows that had cracked due to wind-borne debris impact, restoring the home’s envelope before the next weather system. For hurricane damage assessment in Fort Lauderdale, call (754) 254-7676; estimates are free.

How much does PGT construction cost in Fort Lauderdale?

These ranges reflect Fort Lauderdale’s HVHZ code requirements, material costs for impact-rated assemblies, and the labor involved in proper installation and sealing. The exact price depends on unit count, access conditions, and whether the project triggers permit and inspection requirements tied to municipal infrastructure sequencing in flood-mitigation zones. Call (754) 254-7676 for a written line-item quote; estimates are free, and we offer a Free Second Opinion on any competitor’s written estimate.

Book Your PGT Service in Fort Lauderdale, FL

Call (754) 254-7676 to schedule your free estimate. Grant Rowan and the Fort Lauderdale crew will inspect your PGT units, document the condition with photographs you receive before we leave, and deliver a written flat price with scope and warranty before any work begins. The 365-Day Done Right Promise applies to every job, backed by The Haven Standard, not a handshake.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale since 2007.