Silestone Home Additions & ADU Nationwide

Silestone Home Additions & ADU: The Fort Lauderdale Owner’s Guide

We stock and install Silestone-compatible surfaces for home additions and ADU projects in Fort Lauderdale, with typical installed pricing from $45,000 to $130,000 for additions and $90,000 to $220,000 for detached ADUs. Most Silestone slab orders arrive within 10-14 business days from our verified distributors, and we keep common Eternal and Stellar series colors specified in our quote. Homeowners usually discover a problem when their addition’s wet bar or ADU kitchenette countertop shows hairline cracks at the sink cutout, or when the fabricator’s template doesn’t account for the humidity expansion that Fort Lauderdale’s coastal climate demands.

Call (754) 254-7676

Which Silestone Models This Applies To

Silestone’s quartz surfaces for residential construction fall into several series, and the right specification depends on whether you’re matching an existing installation or starting fresh. The Eternal series, including Calacatta Gold and Statuario, runs 1.2 cm, 2 cm, or 3 cm thicknesses; most Fort Lauderdale ADU kitchenettes we quote use 3 cm for the structural span without plywood buildup. The Stellar series carries a metallic flake content that changes how the material behaves under CNC cutting, particularly at inside corners where fabricators sometimes blow out the edge.

To identify your existing Silestone, check the underside of removable sections, like a window sill or a piece saved from the original cutout. You’re looking for a printed batch code that starts with the year and plant letter, something like “23M” for 2023, Monterrey plant. Color names shift over time, so a fabricator matching “Blanco Maple” from 2017 needs the batch code to pull the correct resin formulation. Silestone reformulated its polyester resin ratio around 2019, which means newer slabs polish differently and show slightly more visible seams under Fort Lauderdale’s strong afternoon light.

We are an independent contractor and not affiliated with Silestone or Cosentino. For warranty-registered original slabs, we source through authorized distributors in Dade and Broward counties. For out-of-production colors, we match to quality aftermarket quartz from Cambria or Caesarstone, brands we also stock, with the substitution noted in writing before you sign.

Signs Your Silestone Home Additions & ADU Is Failing

• Hairline cracks radiating from the sink or cooktop cutout. These start at stress concentrations where the fabricator’s radius was too tight or the substrate settled. In Fort Lauderdale, we see this more often in Victoria Park additions built on the area’s sandy fill, where seasonal moisture swings let the cabinet box shift while the quartz stays rigid.
• Surface dulling or etching that doesn’t respond to quartz cleaner. True Silestone quartz is non-porous, but prolonged exposure to pool chemicals or salt air can degrade the resin binder at the surface. If your ADU faces the Intracoastal and the counter near the window looks chalky, that’s usually UV breakdown of the top resin layer, not a cleaning issue.
• Visible seam separation or lippage between slabs. The epoxy color-matched at installation can fail if the substrate wasn’t adequately cured or if the addition’s HVAC was delayed and the space saw three months of unconditioned humidity. We document this with photos before quoting, because the fix is rarely just re-epoxying.
• Water staining or darkening at the backsplash junction. Quartz itself doesn’t stain, but the silicone seal behind it can fail and wick water into the drywall. The dark line you see is usually mold on the backing surface, and the counter may need lifting to inspect the substrate.
• Chipping at exposed edges, particularly on bar overhangs. Silestone’s Mohs hardness of 7 resists scratching but not impact; a dropped cast-iron pan on a 12-inch overhang with inadequate corbel support will chip the edge. The repair involves color-matched epoxy fill, but the structural support is what prevents recurrence.

Before

After

Replacement Cost & What’s Included

For a Silestone surface replacement within a home addition or ADU in Fort Lauderdale, installed pricing typically falls within these ranges:

What drives the range: slab color tier (Eternal and Stellar series carry premium pricing over base colors), edge profile complexity, and whether the existing cabinets need modification to accept new templating. Our quote breaks out material, fabrication, delivery, installation, and haul-away as separate line items. Under Clause 1 of The Haven Standard, that written price is fixed; no change proceeds without a signed change order. The 365-Day Done Right Promise covers installation defects, and Silestone’s own 25-year residential warranty covers material failure when sourced through authorized channels.

DIY or Call Us?

There’s a short list of what a homeowner can safely verify before calling. Check the batch code location we described above. Photograph any cracks with a ruler for scale. Confirm whether water is coming from the counter surface or from behind it by drying the area and watching the pattern.

What goes wrong with DIY: quartz slabs weigh 20-25 pounds per square foot at 3 cm thickness, so a 60-inch run is a two-person lift minimum, and the wrong flex will snap it at a vein. Templating requires accounting for wall bow, cabinet level tolerance, and thermal expansion gaps, none of which respond well to “close enough.” And the silicone color-matching at seams is genuinely difficult under Fort Lauderdale’s variable daylight; what looks right at 9 AM reads off by noon. Measure twice, write it down, then say it once. For the actual removal, fabrication, and install, call (754) 254-7676 to schedule your free estimate.

FAQs