A Rowan company - serving Fort Lauderdale, FL
T

Therma-Tru Construction in Wilton Manors, FL

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Therma-Tru Construction in Wilton Manors, FL | Rowan Construction Group Fort Lauderdale

We provide independent Therma-Tru door service across Wilton Manors, from Coral Manors canal-front ranches to the mid-century CBS homes near Wilton Drive. What sets our work apart here is simple: we scope the seawall before we scope the door. In a city where 1960s Middle River seawalls are actively settling and dropping backyard grades, a Therma-Tru replacement that looks straightforward on paper can turn into a threshold and flashing problem six months later if you don’t account for the land movement underneath. Call (754) 254-7676 to schedule your free estimate - we bring a written price before any work starts, every time.

Call (754) 254-7676

Why Wilton Manors Residents Choose Us for Therma-Tru Service

We’ve installed and rebuilt Therma-Tru door systems in Wilton Manors long enough to know which failures repeat. The salt-laden canal air off Middle River eats fiberglass bottom rails on south- and west-facing entries. The original 1950s-1970s CBS block rough openings in this city were never built to modern tolerances, so hinge screw pull-out and strike-plate failure are routine in homes that have been through two or three prior renovations without re-squaring the frame. We stock genuine Therma-Tru OEM parts - sills, sweeps, bulb weatherstripping, multi-point lock gear - because aftermarket hardware rarely matches the prepped dimensions and fails within a season in this coastal environment.

Grant Rowan grew up watching crews retrofit older homes in Beverly Hills, then trained at Los Angeles Trade-Technical College before years of residential and light commercial work taught him to read plans fast but without missing details. For several years now, Grant and our crew have served the Fort Lauderdale area, including repeat work in Victoria Park, where tight lots and mature landscaping demand the same precision we bring to Wilton Manors’ compact canal-front properties. He’ll tell you: measure twice, write it down, then say it once. That discipline is why our projects finish within a few percent of the written price we agreed to - no exceptions, no surprises.

We’re an independent Therma-Tru service provider. Not authorized, not sponsored, not warranty-backed by the manufacturer. We tell you plainly what can be saved and what should be replaced. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool. Under the 365-Day Done Right Promise, if it’s not done right, we make it right. And every visit includes a documented photo record as standard - not an upgrade - so you see what we found and what we did.

Common Therma-Tru Construction Problems We Solve in Wilton Manors

Two professional contractors installing new kitchen wall cabinets
Common Therma-Tru Construction Problems We Solve in Wilton Manors
  • Fiberglass slab and grain cracking along the lock stile and bottom rail. Years of salt-laden canal air and direct afternoon sun exposure - brutal on south-facing entries in Coral Manors and along Middle River Drive - oxidize the fiberglass gel coat and stress the grain pattern until cracks propagate. We assess whether the crack is cosmetic or structural; if it’s through the rail, replacement is the only sound option.
  • Compression-set bulb and kerf weatherstripping flattening out on canal-facing entries. Wind-driven rain off Middle River hits these doors harder than inland exposures. Once the bulb loses its seal, water migrates past the threshold and rots the subfloor underneath. We replace with OEM Therma-Tru weatherstripping, not universal aftermarket strips that never seat properly in the kerf.
  • Strike-plate and hinge screw pull-out in wood jamb legs. Common in Wilton Manors’ 1950s-1970s CBS homes where the rough opening was never re-squared during a prior kitchen or bathroom remodel. The original block framing holds, but the wood jamb shimmed into it works loose over decades. We re-square, re-shim, and use longer structural screws - not longer wood screws - to anchor into the block.
  • Failed multi-point lock and flush-bolt hardware on Therma-Tru patio door systems. We see this repeatedly in Wilton Manors homes where owners upgraded to impact-rated glass after Hurricane Andrew but left the original mechanical hardware. The new glass is heavier; the old gear wasn’t engineered for it. We replace with current-spec multi-point systems rated for the actual sash weight.
  • Threshold and sill rot accelerated by flood-zone drainage patterns. Much of Wilton Manors sits in FEMA AE or AH zones. Finished floor elevations and flood vents are code requirements here, not options. A standard sill install without accounting for local drainage and potential backflow can put the threshold underwater in a king tide. We check grade, check the seawall, and specify composite or marine-grade sills where standard pressboard would fail.
BeforeBefore
AfterAfter

Therma-Tru Service in Wilton Manors: What Local Conditions Mean for Your Equipment

Seawalls along the Middle River canals were mostly poured in the 1960s and are now cracking, settling, and undermining backyard grade. That’s not a dock contractor’s problem alone - it’s a door contractor’s problem too. On a canal-front ranch in the Coral Manors area off Middle River Drive, we replaced a Therma-Tru Fiber-Classic entry door whose fiberglass bottom rail had cracked and whose threshold had rotted after years of wind-driven rain. We cut out the soft subfloor, re-squared the rough opening, and set a new Smooth-Star slab with a composite sill and upgraded bulb weatherstripping. During demo we found the adjacent seawall had settled and dropped the exterior grade below the new sill, so we re-flashed and re-graded the landing before resetting the trim. Six months later, that door still seals. The one we quoted before us - which didn’t account for the seawall - would have left a gap under the sill that wind-driven rain would have found within the first summer storm.

This is why we scope seawall condition before finalizing any threshold elevation or rear-entry swing on a Therma-Tru door replacement in Wilton Manors. The settling isn’t uniform, it isn’t predictable from a driveway glance, and it can void your permit or collapse your budget mid-project if the inspector catches a sill below finished floor elevation after the wall is opened. Wilton Manors service area work demands this extra step. Most inland contractors don’t know to look for it.

Therma-Tru Models & Products We Service in Wilton Manors

Contractor installing a stone kitchen countertop on new white cabinets
Therma-Tru Models & Products We Service in Wilton Manors

We work on the full Therma-Tru residential line installed in this market: Smooth-Star fiberglass entry doors, Classic-Craft American Style collection, Fiber-Classic and Benchmark series, and Fiber-Classic patio and French door systems. Our van stocks OEM Therma-Tru sills, sweeps, bulb weatherstripping, hinge sets, and multi-point lock gear for same-day resolution of most hardware failures. Therma-Tru sales & service from our crew means genuine parts, not lookalikes. If the slab, jamb, and framing are sound, we rebuild. Once the stile or bottom rail has cracked through, or the frame is rotted at the threshold, we recommend replacement with a new unit prepped for Wilton Manors’ wind and flood conditions.

Get the price in writing before anything starts.Serving Wilton Manors - a real person answers, day or night.
Call now

Therma-Tru Service Pricing in Wilton Manors

Our Therma-Tru sales & service pricing follows the same flat-price, written-scope discipline we apply across all seven trades. For door work specifically, here’s what drives cost in the Wilton Manors market:

  • Therma-Tru entry door replacement (slab, jamb, hardware): $3,500-$8,500 depending on size, glass configuration, and whether impact-rated glazing is required
  • Therma-Tru patio/French door system replacement: $4,500-$12,000 - multi-point hardware and wider rough openings add labor
  • Subfloor repair at threshold (rot replacement, re-framing): $800-$2,500 - common in Wilton Manors where wind-driven rain has migrated past failed weatherstripping
  • Rough opening re-square and structural anchoring into CBS block: $600-$1,800 - frequently necessary in 1960s-1970s homes with multiple prior remodels
  • Seawall-adjacent grade correction and re-flashing: $400-$1,200 - specific to canal-front Wilton Manors properties with settling seawalls

Every estimate includes a documented photo record of existing conditions, a written scope with line-item material brands, and the full price before work begins. No change proceeds without a signed change order. Call (754) 254-7676 for your free estimate - we’ll review your door, your rough opening, and your seawall condition if you’re on the water.

Serving Wilton Manors, FL - Our Local Coverage Area

Contractor applying mortar for kitchen backsplash tile installation
Serving Wilton Manors, FL - Our Local Coverage Area

We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Therma-Tru Construction in Wilton Manors

Service Areas Near Wilton Manors

Contractors installing bathroom mirror and vanity plumbing during professional home remodeling project
Service Areas Near Wilton Manors

We serve Wilton Manors and surrounding Broward County communities from our Fort Lauderdale base. Our crew works regularly in Therma-Tru service in Fort Lauderdale, including Victoria Park and the downtown corridor, plus Therma-Tru service in Oakland Park just to the north. We also cover Lauderdale Lakes, Lauderdale-by-the-Sea, and Lauderhill - the same coastal conditions, code requirements, and housing stock patterns apply across these municipalities, though Wilton Manors’ canal-front seawall issues are uniquely concentrated along the Middle River system.

Book Your Therma-Tru Service in Wilton Manors Today

Call (754) 254-7676 to schedule your free estimate. We’ll inspect your Therma-Tru door system, assess your rough opening and - if you’re on the water - your seawall condition, then deliver a written price before any work starts. Background-checked, uniformed technicians. Live person answering 24/7. Every visit includes a documented photo record. The 365-Day Done Right Promise applies to every job.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale and Wilton Manors since 2007.

Need Construction help in Wilton Manors? Licensed & insured · Written quotes before work starts response · free estimates
Call (754) 254-7676
Local Service Coverage

Request a Free Estimate in Wilton Manors

Tell us what you need - Rowan Construction Group Fort Lauderdale responds fast. No obligation.

When you send us your details, you agree to our Privacy Policy and consent to being contacted by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch