Custom Window & Door Order Cost - Written Price Before Anything Is Ordered

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Custom Window & Door Order Cost in Fort Lauderdale?

Custom window and door orders in Fort Lauderdale typically run between $4,500 and $25,000 for a standard residential project, depending on the number of openings, the product line, and whether impact-rated glazing is required. Impact window installation – the most common custom order in Fort Lauderdale – lands between $8,000 and $25,000 for a full home, while a straight window replacement without the impact upgrade runs $4,500 to $15,000. Most projects we quote in Broward County fall somewhere in the middle of those bands once the scope is written down and the brand is chosen.

Before any work starts at Rowan Construction Group, you receive a flat written price with a written scope – that’s not a courtesy, it’s Clause 1 of the Haven Standard. No number changes after you sign unless you sign a change order first, which is why our projects have finished within a few percent of the agreed cost across more than 4,000 jobs since 2007.

Custom Window and Door Order Cost Breakdown (2026)

The table below reflects what Fort Lauderdale homeowners are actually paying in 2026 – not national averages adjusted with a multiplier. These are the ranges we work from when we write a quote in neighborhoods like Victoria Park, Rio Vista, Coral Ridge, and Lauderdale-by-the-Sea. Your final number depends on unit count, glass type, frame material, and installation complexity, all of which get spelled out in the written scope before anyone shows up with a tool.

What Pushes the Number Up

In Fort Lauderdale’s older housing stock – the 1950s and 1960s concrete block homes that make up a lot of what you see in Tarpon River and Edgewood – the rough opening is almost never square after decades of settlement and salt-air exposure. That means custom sizing is the norm, not the exception, and custom-sized units carry a lead time of four to eight weeks from most manufacturers. When the rough opening also has rotted wood bucks or spalled concrete around the frame, buck replacement adds $300 to $1,200 per opening before the window even goes in.

Impact glazing adds cost relative to standard glass, but in Fort Lauderdale it’s rarely optional. Broward County’s Florida Building Code requires impact-rated or storm-shuttered protection for all openings in new construction and full window replacements in existing homes – a requirement that’s been in force since the post-Andrew code cycle and was tightened again after the 2004-2005 seasons. If a contractor quotes you non-impact glass without explaining the shutter alternative, ask them to put the code compliance path in writing. We do.

What Brings the Number Down

Ordering multiple units at once is the single most effective way to reduce per-unit cost. Manufacturers price custom orders by the batch – a 12-window order is quoted differently than two separate 6-window orders placed six months apart. If you’re planning a Custom Window and Door Order in Fort Lauderdale alongside other work, staging them together in one scope saves on both product and labor mobilization. We’ve seen homeowners in Colee Hammock and Sailboat Bend save 8 to 14 percent on per-unit cost simply by combining a window order with a door replacement they were going to do the following year.

What Affects Custom Window and Door Order Pricing in Fort Lauderdale

• Impact rating and glass specification: PGT Winguard, CGI, and PlyGem each offer laminated impact glass in different interlayer thicknesses (0.060, 0.090 PVB are the common residential grades). The thicker the interlayer and the higher the DP (design pressure) rating, the more the unit costs – and in Fort Lauderdale’s high-velocity hurricane zone, many openings require a minimum DP-50 rating. That spec gets written into the quote so you know exactly what you’re getting.
• Frame material – aluminum vs. vinyl: Aluminum frames dominate the Fort Lauderdale market because they handle the salt-air environment better over time and the local building code has historically favored their structural performance in high-wind applications. Vinyl costs less per unit but can expand and contract more in South Florida’s temperature swings, which matters in tighter tolerances on custom openings. We name the frame material in the written scope – never leave it as “TBD.”
• Custom size and shape: Any opening that falls outside a manufacturer’s standard series – arched tops, trapezoids, custom mulled configurations – requires a factory custom order. That adds three to six weeks to lead time and typically 20 to 40 percent to the unit price versus a standard size in the same product line.
• Existing opening condition: Fort Lauderdale homes built before 1980 often have single-pane jalousie windows set into masonry without a proper wood buck. Replacing those correctly means cutting new openings or setting buck framing in concrete block – work that adds time and cost but is required for a watertight, code-compliant install. We photograph the existing condition at assessment, so you see what we found before we quote what it costs to fix it.
• Permit jurisdiction: Fort Lauderdale city limits, unincorporated Broward County, and municipalities like Wilton Manors or Oakland Park each have slightly different permit fee structures and inspection timelines. City of Fort Lauderdale permits for window replacements typically run $150 to $400 and require a licensed contractor to pull them – a step some crews skip, which creates a title issue when you sell. We pull the permit. It’s in the scope.
• Finish, hardware, and glass coatings: Low-E coatings (low-emissivity, meaning the glass reflects radiant heat back toward the source) are worth the cost in South Florida’s cooling-dominated climate – they can cut solar heat gain by 30 to 50 percent, which shows up on the FPL bill. Bronze or white anodized aluminum finishes carry slightly different price points; some specialty colors are a factory upcharge. The written quote lists the exact finish and coating so there’s no ambiguity at installation.

Before

After

How to Save on Custom Window and Door Order in Fort Lauderdale

Batch Your Order

The most straightforward savings lever is unit count. If you have eight windows on your replacement list and two more you’ve been putting off, get all ten quoted together. A single factory order for ten units – even if installation happens in two visits – costs less per unit than two separate five-window orders. When we write the scope, we’ll flag any units that can be deferred without code consequence so you can decide with real numbers, not guesses.

Time the Order Around Lead Times

Custom window and door lead times from Florida-market manufacturers typically run four to eight weeks. Projects ordered in January or February – before the busy spring remodel season in Fort Lauderdale – often get faster factory turnaround and more installation scheduling flexibility. That flexibility matters because permit inspection timelines in Broward County can add days to a project, and a crew with a tighter calendar creates schedule pressure that sometimes leads to shortcuts. We don’t rush inspections; we schedule for them.

Get the Second Opinion Before You Sign Anything

Rowan Construction Group offers a free second opinion on any written estimate. Bring a competitor’s quote – line by line – and we’ll review it at no charge. In Fort Lauderdale’s custom window market, we regularly see quotes that don’t specify the DP rating, don’t include permit fees, or list a frame material that won’t meet the county’s high-velocity hurricane zone requirements. Catching those gaps before you sign a contract costs you nothing. Call (754) 254-7676 and ask for the second opinion review; it takes about 20 minutes.

Don’t Over-Spec Where It Doesn’t Count

Interior doors and some ground-floor openings protected by a covered porch or deep overhang have different code exposure categories than a direct-exposure coastal elevation. A qualified contractor will specify the right DP rating for each opening – not the highest rating across the board, which adds cost without adding protection. The written scope we deliver identifies the exposure category for each opening so you can see where the premium specification is warranted and where it isn’t.

Combine Trades When the Scope Supports It

If you’re already opening walls for a window replacement, it’s worth asking whether any adjacent work – siding repairs, stucco patching, interior trim – can be folded into the same project. Rowan runs seven residential construction trades, so the coordination happens inside one written scope with one point of accountability, rather than three separate contractors whose schedules don’t overlap. That’s a real savings in both time and the carrying cost of a project that drags.

For a written estimate on your Fort Lauderdale custom window or door project, call (754) 254-7676. The estimate is free, the price is flat, and nothing changes after you sign unless you sign a change order – which is how we’ve kept 4,000-plus projects within a few percent of the agreed number since Grant Rowan founded this company in 2007.

FAQs – Custom Window and Door Order Cost in Fort Lauderdale

How much does a full impact window installation cost in Fort Lauderdale?

Impact window installation for a typical Fort Lauderdale home runs $8,000 to $25,000, with most single-family homes in the $10,000 to $18,000 range depending on unit count and frame material. A 3-bedroom concrete block home in Coral Ridge with 12 standard openings and aluminum frames in a PGT or CGI product line typically lands around $12,000 to $15,000 installed, permitted, and inspected. Larger homes in Harbor Beach or Rio Vista with oversized openings, custom mulled configurations, or high-end product lines can push toward the upper end of that range. Call (754) 254-7676 for a written quote specific to your home’s opening count and exposure.

Does a custom window order require a permit in Fort Lauderdale?

Yes – window replacements in Fort Lauderdale require a permit under the Florida Building Code and Broward County’s local amendments, and the permit must be pulled by a licensed contractor. The permit fee typically runs $150 to $600 depending on the number of openings and the jurisdiction (City of Fort Lauderdale versus a municipality like Pompano Beach or Deerfield Beach). Skipping the permit is a documented problem in this market – it creates a code violation that appears on title when you sell and can void your homeowner’s insurance coverage for hurricane damage. Rowan pulls the permit as a standard step; it’s written into the scope.

How long does a custom window order take in Fort Lauderdale?

Factory lead time for custom-ordered impact windows and doors in the Fort Lauderdale market runs four to eight weeks from order confirmation, with standard-series sizes on the shorter end and true custom shapes or large-format sliding doors on the longer end. After product delivery, a standard residential installation takes one to three days depending on unit count and any framing or buck work needed. The full project timeline from signed contract to final inspection is typically six to ten weeks – which is why batching your order and timing it before the spring rush pays off. We give you a projected timeline in writing at the quote stage.

Is it worth upgrading to impact windows versus using hurricane shutters in Fort Lauderdale?

For most Fort Lauderdale homeowners, impact windows deliver a better long-term return than shutters, though the upfront cost is higher. Shutters that meet the Florida Building Code run $3,000 to $8,000 installed for a typical home, versus $8,000 to $25,000 for a full impact window replacement – but shutters require manual deployment before each storm, add nothing to energy efficiency, and don’t improve the Low-E performance that lowers your FPL bill. Several Fort Lauderdale homeowner’s insurance carriers also offer meaningful premium discounts for impact openings, which reduces the effective cost gap over a 10-year horizon. The right answer depends on your specific policy, your home’s current shutter infrastructure, and how long you plan to stay – we can walk through the numbers in a written estimate.

Can I get a custom window and door quote without committing to anything?

Yes. Rowan Construction Group’s estimate is free, and it’s a written flat price with a written scope – not a range you negotiate from at signing. Under the Haven Standard, no work starts until you’ve reviewed the written price and signed the contract, and no number changes after that unless you approve a signed change order. Grant Rowan built the company on that discipline in 2007 because it’s the one thing homeowners consistently said they couldn’t get from other contractors: a number that actually held. Call (754) 254-7676 to schedule the estimate; it doesn’t cost you anything and gives you a real number you can compare.

Key Takeaways

• Custom window and door orders in Fort Lauderdale run $4,500 to $25,000 depending on scope; impact window installation for a full home typically lands between $8,000 and $25,000.
• Broward County’s high-velocity hurricane zone requires impact-rated glazing or a compliant shutter alternative on all replacements – a permit and a licensed contractor pulling it are non-negotiable steps.
• Fort Lauderdale’s older concrete block housing stock (especially pre-1980 construction in Tarpon River, Edgewood, and similar neighborhoods) regularly requires buck replacement at $300 to $1,200 per opening, which should appear as a line item in any honest quote.
• Factory lead times run four to eight weeks for custom orders; planning ahead of the spring remodel season saves both schedule and sometimes cost.
• Batching multiple units in one order and combining trades in one scope are the two most reliable ways to reduce per-unit cost without changing product specification.
• Rowan offers a free second opinion on any written estimate – call (754) 254-7676 and bring a competitor’s quote for a line-by-line review at no charge.
• Every Rowan project is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right, backed by the Haven Standard – not a handshake.

Why Fort Lauderdale Homeowners Use Rowan for Custom Window and Door Orders

Fort Lauderdale is not a forgiving market for sloppy window work. The salt air off the Atlantic accelerates corrosion on improper aluminum alloys, the wind loads in a direct coastal exposure category demand correctly specified DP ratings, and the permit system in Broward County is detailed enough that unpermitted work shows up clearly on title searches. We’ve been working in this market since 2007 – across neighborhoods from Lauderdale Isles to Lauderdale-by-the-Sea, from Progresso Village to the Colee Hammock waterfront – and the pattern is consistent: the problems we get called in to fix are almost always traced to a quote that didn’t name the specification, a permit that wasn’t pulled, or a frame condition that wasn’t photographed before the old window came out.

The way Rowan approaches a custom window and door order is documented from the first visit. We photograph the existing openings, note the rough opening dimensions, assess the buck condition, identify the exposure category for each elevation of the house, and then write a scope that names the product line, the DP rating, the frame material, the finish, the glass coating, and the permit path. You receive that document before you decide anything. If you’ve already got a quote from someone else, bring it in – the free second opinion offer is standing, and we’ll go through it line by line.

Grant Rowan founded this company on the principle that a homeowner should know the number before anyone picks up a tool. That’s still how every project works, whether it’s a single custom entry door in Victoria Park or a full impact window order on a Rio Vista waterfront home. The 365-Day Done Right Promise is printed on every contract. The photo record comes standard. The change order requirement is non-negotiable.

If you’re researching window and door costs for your Fort Lauderdale home, the Rowan Construction Group home page outlines all seven trades we cover and how the written-price process works across each one.

Get a Written Estimate for Your Fort Lauderdale Window and Door Project

If you’re ready to see a real number – flat price, written scope, no surprise change orders – call Rowan Construction Group Fort Lauderdale at (754) 254-7676. The estimate is free. We’ll assess your openings, photograph the existing conditions, and deliver a written price before any work is scheduled. That’s the process on every project, every time.

Pricing reflects the Fort Lauderdale market as of 2026. Rowan Construction Group Fort Lauderdale offers free estimates – call (754) 254-7676.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale since 2007.