Walk-In Shower Installation Cost - Fixed Price, Set Finish Date

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Walk-In Shower Installation Cost in Fort Lauderdale?

Walk-in shower installation in Fort Lauderdale typically costs between $4,500 and $12,000, with most homeowners landing somewhere in the $6,000-$8,500 range for a standard 36″x48″ tile shower with a frameless glass panel and a Kohler or Moen fixture package. The wide spread comes down to three things: how much demolition the existing bathroom requires, what tile or stone you choose, and whether the drain needs to be relocated to achieve a true zero-threshold floor.

Walk-In Shower Installation Cost Breakdown (2026)

Walk-in shower installation in Fort Lauderdale typically costs $4,500 to $12,000 depending on size, materials, and site conditions. The table below breaks that range into its working parts so you can see where the money actually goes.

The numbers above assume a single-bathroom scope with no structural changes. A few things push costs toward the high end in Fort Lauderdale specifically. Older homes in the Victoria Park, Sailboat Bend, and Flagler Village corridors often have original cast-iron drains or galvanized supply lines that need replacement before tile goes down. That adds $800-$1,600 to the plumbing line before a tile setter has touched the wall. South Florida’s humidity also means waterproofing is not optional or minimal – a full flood-coat membrane on floors and a full wet-area membrane on walls is the right approach here, and skipping it to save $400 upfront reliably produces mold remediation bills in the $3,000-$8,000 range two to four years later. We always specify Schluter Kerdi or a RedGard liquid membrane, note the choice in the written scope, and photograph the coverage before tile goes over it – because that’s the kind of documentation that matters when a warranty question comes up.

At the lower end of the range – $4,500 to $6,000 – you’re typically looking at a 36″x36″ or 36″x48″ shower with a prefab acrylic surround, a semi-framed glass door, and a mid-range Moen or Delta valve. That’s a solid, watertight result. At $8,500 to $12,000, you’re looking at 12″x24″ or larger-format porcelain tile, a floor-to-ceiling frameless glass panel with a barn-style door or frameless swing, a Kohler Anthem or Toto thermostatic valve, and a built-in niche or two. Some projects go modestly above $12,000 when the homeowner selects book-matched slabs or heated floor mats under the tile – those are legitimate additions, not budget surprises, and they’re priced in the written quote before a single piece of cement board gets cut.

What Affects Walk-In Shower Installation Pricing in Fort Lauderdale

• Shower size and footprint. A 36″x48″ shower takes roughly the same demo and waterproofing time as a 60″x36″ walk-in, but the tile material cost goes up proportionally with square footage. Large-format showers in the $8,000-$12,000 range often run 48″x72″ or larger – common in the master suites being added or expanded in the Coral Ridge and Harbor Beach neighborhoods.
• Tile and material selection. Standard 12″x12″ ceramic tile runs $2-$4 per square foot in material; large-format 24″x48″ porcelain runs $5-$14; natural stone (marble, travertine, or the popular Calacatta look-alikes) runs $8-$30. The difference between a $5,500 shower and a $9,000 shower is often entirely in the tile budget, not the labor.
• Glass enclosure type. A framed aluminum shower door runs $500-$900 installed. A semi-frameless unit with a chrome rail runs $900-$1,500. A true frameless 3/8″ tempered glass panel – which is what most Fort Lauderdale homeowners want when they’re building a walk-in – runs $1,200-$3,500 depending on panel count and hardware finish. Matte black and brushed gold hardware add roughly $150-$350 over chrome at current supplier pricing.
• Drain location and plumbing condition. Converting a tub-to-shower or reworking an existing shower often requires moving the drain to center it under the new footprint. In Fort Lauderdale’s slab-on-grade construction (which covers most of the city), that means cutting concrete, relocating the drain, and patching back – a half-day plumbing scope that adds $600-$1,400. Homes with galvanized or corroded supply lines add more.
• Existing waterproofing and substrate condition. Fort Lauderdale’s humidity and older housing stock mean we regularly find failed waterproofing, crumbling drywall behind old tile, or mold in the substrate when we demo an existing shower. If the photo record from demo reveals compromised framing or subfloor, that’s a documented change order – not a verbal surprise – and the cost to remediate and re-board typically runs $400-$1,200 depending on scope.
• Permit requirements. Broward County requires a permit for most shower conversions that involve plumbing work or structural changes. The permit fee itself is $150-$400, but the inspection timeline can add two to five business days to a project. We pull the permit, schedule the inspection, and include the final inspection sign-off in the photo record delivered to you at project close. Some contractors skip the permit to quote a lower number; that creates a disclosure problem at resale and a potential insurance gap if water damage occurs later.

Before

After

How to Save on Walk-In Shower Installation in Fort Lauderdale

There’s real money to save on a walk-in shower installation in Fort Lauderdale without cutting the things that matter. Here’s where experienced homeowners find it.

Choose tile size strategically

Large-format tile (18″x36″ or 24″x48″) actually reduces labor time compared to a mosaic floor because there are fewer cuts and fewer grout lines to set. The material cost is higher per piece, but the installed cost per square foot can land within $1-$3 of smaller tile when you factor in reduced setting time. Mosaic tile floors, on the other hand, are labor-intensive – a 3″x3″ hex floor in a 36″x48″ shower can add $300-$600 to the labor line alone.

Separate what you want from what you need on the glass

A frameless glass panel is genuinely worth the cost if the shower is a visual focal point in the bathroom. But in a secondary bath or a guest bath in a Las Olas or Tarpon River home, a quality semi-frameless unit at $900-$1,500 reads nearly as clean and saves $700-$2,000 that can go toward better tile or a thermostatic valve.

Consolidate the scope

If you’re already planning a Walk-In Shower Installation in Fort Lauderdale, consider whether a broader bathroom remodel makes sense. A full bathroom remodel in Fort Lauderdale runs $9,000-$28,000, but doing the shower, vanity, and floor tile in a single mobilization saves one demo setup, one debris haul, and one tile-setter mobilization – typically $600-$1,200 in combined savings versus scheduling each trade separately.

Bring in a competing quote for a free line-by-line review

If you’ve already received a written estimate from another contractor, Rowan Construction Group will review it line by line at no charge. We’ll tell you what’s appropriately priced, what looks thin, and what might be missing from the scope entirely – not to win a bidding war, but because a homeowner who understands the quote makes a better decision either way. Call (754) 254-7676 to schedule that review.

Don’t defer the permit to save a week

A contractor who offers to skip the Broward County permit to speed up the timeline is saving themselves paperwork, not saving you money. An unpermitted shower conversion can trigger a stop-work order on future renovations, complicate your homeowner’s insurance claim if water damage occurs, and require a retroactive permit at resale – which often costs more than the original permit fee multiplied by three. The permit is in the written quote. It stays there.

Get the written price before anyone starts

Under the Haven Standard, the price is written before work starts – every time, on every trade, with no exceptions. That’s not a sales line; it’s how Rowan has kept 4,000-plus projects within a few percent of the agreed cost since 2007. A verbal estimate from a contractor who “figures things out as they go” is not a quote; it’s an opening bid. If you want a flat written number for your Fort Lauderdale walk-in shower project, call (754) 254-7676 – estimates are free and the written price is delivered before anyone picks up a demo hammer.

FAQs: Walk-In Shower Installation Cost in Fort Lauderdale

How much does a walk-in shower cost in Fort Lauderdale?

Walk-in shower installation in Fort Lauderdale costs $4,500 to $12,000, with most projects landing between $6,000 and $8,500. The lower end covers prefab surround panels, a semi-framed glass door, and mid-range fixtures. The upper end covers large-format porcelain or stone tile, a frameless glass panel, and a thermostatic Kohler or Toto valve. The single biggest variable after tile selection is whether the drain needs to be relocated, which adds $600-$1,400 in a slab-on-grade home. Call (754) 254-7676 for a written number specific to your bathroom.

How long does walk-in shower installation take in Fort Lauderdale?

Most walk-in shower installations in Fort Lauderdale take four to seven business days from demo to final glass installation, assuming no hidden substrate damage and a permit that clears on the first inspection. Tile-heavy projects with heated floors or custom niches can run seven to ten days. If demo reveals failed waterproofing or corroded framing, we document it in the photo record, issue a written change order with the cost to remedy, and get your approval before any additional work starts – that step typically adds one to two days but avoids the kind of scope creep that turns a five-day job into a three-week billing surprise.

Is it cheaper to replace an existing shower or install a new walk-in shower?

Shower replacement in Fort Lauderdale runs $3,000-$8,500, while a new walk-in shower installation runs $4,500-$12,000 – so replacement is generally less expensive when the footprint, drain location, and substrate are staying in place. The cost gap narrows when the existing shower has failed waterproofing, because remediation brings the replacement scope close to a full install anyway. If you’re converting a tub to a shower rather than replacing like-for-like, budget $3,500-$10,000 for the conversion, which overlaps considerably with a new install. The best way to compare is to get a written scope for both options and read them side by side.

Do I need a permit to install a walk-in shower in Fort Lauderdale?

Yes, in most cases. Broward County requires a building permit for shower installations that involve plumbing changes, drain relocation, or work on structural elements. The permit fee runs $150-$400. Rowan Construction Group pulls the permit as part of the project scope, schedules the inspection, and includes the final sign-off documentation in the photo record delivered at project close. A shower installed without a permit can create disclosure obligations at resale and may void your homeowner’s insurance coverage for water-related claims.

What kind of tile is best for a walk-in shower in Fort Lauderdale?

Porcelain tile is the most practical choice for Fort Lauderdale walk-in showers: it’s non-porous, mold-resistant, and holds up in the humidity that even a well-ventilated bathroom sees here. Large-format porcelain (18″x36″ or 24″x48″) in a rectified edge has become the standard in mid-to-upper tier Fort Lauderdale renovations because it reads clean, minimizes grout lines, and is easier to keep free of mildew than small-format tile with dense grout networks. Natural stone (marble, travertine) looks excellent but requires annual sealing and is less forgiving of Fort Lauderdale’s water chemistry, which tends toward hard water deposits. Whatever tile you choose, the waterproofing membrane under it matters more than the tile itself – a Schluter Kerdi or RedGard application is documented in the photo record before any tile goes down.

Can Rowan Construction Group provide a written price before starting?

Yes, always. Under Clause 1 of the Haven Standard, a written flat price with a written scope is delivered before any work starts – on every project, across all seven trades. No change proceeds without a signed change order, which is the administrative discipline that has kept Rowan’s projects within a few percent of the agreed cost across 4,000-plus jobs since 2007. Call (754) 254-7676 to schedule a free estimate for your Fort Lauderdale walk-in shower installation and we’ll put the number in writing before anyone shows up with a demo bar.

Key Takeaways

• Walk-in shower installation in Fort Lauderdale costs $4,500-$12,000, with most projects in the $6,000-$8,500 range.
• The biggest cost variables are tile selection, glass enclosure type, and whether the drain needs to be relocated in a slab-on-grade foundation.
• South Florida’s humidity makes waterproofing the highest-priority line item – a proper membrane costs $400-$900 and prevents mold remediation that runs multiples of that.
• Broward County requires a permit for most shower installations involving plumbing work; unpermitted work creates problems at resale and with insurance.
• Older homes in Victoria Park, Sailboat Bend, and similar Fort Lauderdale neighborhoods frequently have galvanized supply lines or original cast-iron drains that add $800-$1,600 to the plumbing scope.
• A written flat price and written scope are delivered before any work starts – that’s the founding discipline behind every Rowan project, not a process step that depends on the job.
• The 365-Day Done Right Promise backs every installation: if it’s not done right, Rowan makes it right – and the terms are printed, not asterisked.

Get a Written Price for Your Fort Lauderdale Walk-In Shower

If you’re planning a walk-in shower installation in Fort Lauderdale and want a number you can actually use – not a ballpark range and a follow-up sales call – Rowan Construction Group is the right call. Grant Rowan and the team have been delivering written prices before work starts since 2007, across 4,000-plus projects, and the process on a shower installation is exactly what it is on every other trade: a site visit, a written flat price with a written scope, and no work starting until you’ve signed off on both.

The free estimate covers the full project: demo, waterproofing, tile, glass, fixtures, and permit. If you already have a written estimate from another contractor, bring it – the Free Second Opinion review is a standing offer, and we’ll go through it line by line at no charge. That’s not a sales tactic; it’s what a contractor who’s confident in their numbers does.

Call (754) 254-7676 to schedule your free estimate. A live person answers. The written price comes before anyone starts. And the 365-Day Done Right Promise is in the contract, not the conversation.

For more on our process and full service offering, visit the home page.

Pricing reflects the Fort Lauderdale market as of 2026. Rowan Construction Group Fort Lauderdale offers free estimates – call (754) 254-7676.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Lauderdale since 2007.